ITS4040DEPDXUMA1 vs BTS441RGATMA1 Comparison

Detailed side-by-side comparison of ITS4040DEPDXUMA1 by Infineon and BTS441RGATMA1 by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

Infineon
ITS4040DEPDXUMA1

ITS4040DEPDXUMA1 - 40mΞ© Dual Smart High-Side Switch | Infineon

ITS4040DEPDXUMA1 βœ“ Active
Infineon
BTS441RGATMA1

BTS441RGATMA1 - 17A Smart High-Side Power Switch TO-263-5

BTS441RGATMA1 βœ“ Active

Specification Comparison

Parameter ITS4040DEPDXUMA1 BTS441RGATMA1
Brand Infineon Infineon
Category Power MOSFET Drivers Power MOSFET Drivers
Lifecycle Status Active Active
Stock Status In Stock In Stock
Unit Price (USD) $2.12 $2.21
Product Type Dual-Channel Smart High-Side Power Switch (PROFET) β€”
Topology 1:1 High-Side (N-Channel MOSFET, two channels) Smart High-Side Switch
Number of Channels 2 (independent) β€”
Operating Voltage Range -0.3 V to 45 V (load-dump tolerant) [DATA_NEEDED: Vbb range, e.g. 6V-42V]
Typical On-State Resistance per Channel (RDS(ON)) 60 mΞ© at TJ = 125 Β°C β€”
Continuous Load Current per Channel >2 A β€”
Combined Peak Capability 4.1 A (per datasheet summary) β€”
Per-Channel Current Limit (typ.) 2.6 A β€”
On/Off Input Interface Logic-level GPIO compatible (3.3 V / 5 V) β€”
Diagnostic Output Current-sense (IS) pin, proportional to load current β€”
Integrated Protection Over-current, over-voltage, over-temperature, short-to-ground, short-to-battery, reverse battery β€”
Package PG-TSDSO-14 (exposed pad) PG-TO263-5-2 (TO-263-5)
Mounting Type Surface Mount Surface Mount
Operating Temperature (TJ) -40 Β°C to +150 Β°C (typical automotive PROFET range) β€”
RoHS Status Compliant Compliant
Manufacturer β€” Infineon Technologies AG
Part Number β€” BTS441RGATMA1
Switch Type β€” 1:1 N-Channel High-Side
Number of Outputs β€” 1
Continuous Load Current β€” 17 A
Input Type β€” CMOS-compatible, ground referenced
Diagnostics β€” Yes (fault feedback)
Technology β€” Smart SIPMOS (N-channel vertical FET + charge pump)
Number of Pins β€” 5
On-State Resistance (Rds(on)) β€” [DATA_NEEDED: Rds(on) at 25 C]
Over-Current Protection β€” Yes (integrated)
Thermal Protection β€” Yes (overtemperature shutdown)
Over-Voltage Protection β€” Yes (inductive load clamping)
Automotive Qualified β€” Yes (AEC-Q100 automotive grade)
Tape and Reel Quantity β€” 1000 (per reel)

Datasheets & Resources

Browse All Products Create BOM Request Quote