ITS4040DEPDXUMA1 vs BTS441RGATMA1 Vergleich
Detaillierter Direktvergleich von ITS4040DEPDXUMA1 von Infineon und BTS441RGATMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | ITS4040DEPDXUMA1 | BTS441RGATMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $2,12 | $2,21 |
| Product Type | Dual-Channel Smart High-Side Power Switch (PROFET) | — |
| Topologie | 1:1 High-Side (N-Channel MOSFET, two channels) | Smart High-Side Switch |
| Number of Channels | 2 (independent) | — |
| Operating Voltage Range | -0.3 V to 45 V (load-dump tolerant) | [DATA_NEEDED: Vbb range, e.g. 6V-42V] |
| Typical On-State Resistance per Channel (RDS(ON)) | 60 mΩ at TJ = 125 °C | — |
| Continuous Load Current per Channel | >2 A | — |
| Combined Peak Capability | 4.1 A (per datasheet summary) | — |
| Per-Channel Current Limit (typ.) | 2.6 A | — |
| On/Off Input Interface | Logic-level GPIO compatible (3.3 V / 5 V) | — |
| Diagnostic Output | Current-sense (IS) pin, proportional to load current | — |
| Integrated Protection | Over-current, over-voltage, over-temperature, short-to-ground, short-to-battery, reverse battery | — |
| Gehäuse | PG-TSDSO-14 (exposed pad) | PG-TO263-5-2 (TO-263-5) |
| Montageart | Surface Mount | Surface Mount |
| Operating Temperature (TJ) | -40 °C to +150 °C (typical automotive PROFET range) | — |
| RoHS-Status | Compliant | Compliant |
| Manufacturer | — | Infineon Technologies AG |
| Part Number | — | BTS441RGATMA1 |
| Switch Type | — | 1:1 N-Channel High-Side |
| Anzahl der Ausgänge | — | 1 |
| Continuous Load Current | — | 17 A |
| Input Type | — | CMOS-compatible, ground referenced |
| Diagnostics | — | Yes (fault feedback) |
| Technology | — | Smart SIPMOS (N-channel vertical FET + charge pump) |
| Anzahl der Pins | — | 5 |
| On-State Resistance (Rds(on)) | — | [DATA_NEEDED: Rds(on) at 25 C] |
| Over-Current Protection | — | Yes (integrated) |
| Thermal Protection | — | Yes (overtemperature shutdown) |
| Over-Voltage Protection | — | Yes (inductive load clamping) |
| Automotive Qualified | — | Yes (AEC-Q100 automotive grade) |
| Tape and Reel Quantity | — | 1000 (per reel) |