ITS711L1FUMA1 vs BTS70402EPGXUMA1 Comparison
Detailed side-by-side comparison of ITS711L1FUMA1 by Infineon and BTS70402EPGXUMA1 by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Infineon
ITS711L1FUMA1
ITS711L1FUMA1 - 4-Ch Smart High-Side Switch 1.7A PG-DSO-20 | Infineon
ITS711L1FUMA1 β ActiveInfineon
BTS70402EPGXUMA1
BTS70402EPGXUMA1 - 4-Channel Smart High-Side Switch | Infineon
BTS70402EPGXUMA1 β ActiveSpecification Comparison
| Parameter | ITS711L1FUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Category | Power MOSFET Drivers | Power MOSFET Drivers |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $1.98 | $3.18 |
| Switch Type | High-Side Power Switch | β |
| Number of Outputs | 4 | β |
| Input:Output Ratio | 1:1 | β |
| Output Configuration | High Side | High-side, N-channel MOSFET |
| Output Type | N-Channel | β |
| Continuous Output Current (per channel) | 1.7 A | β |
| Maximum Load Current (package) | 4.4 A | β |
| Load Voltage Range | 5 V to 34 V | β |
| Supply Voltage (Vcc) | Not Required (Logic-level inputs) | β |
| Input Interface | CMOS-compatible, ground-referenced | β |
| Technology | Smart SIPMOS (vertical N-channel DMOS + CMOS logic) | β |
| On-State Resistance (Rdson) | [DATA_NEEDED: Rdson per channel] | β |
| Diagnostic Feedback | Yes (open-drain status output) | β |
| Embedded Protection | Over-load, Over-voltage, Over-temperature, Short-circuit | β |
| Package | PG-DSO-20-31 (DSO-20) | PG-TSDSO-14 (exposed thermal pad) |
| Mounting Type | Surface Mount | Surface Mount |
| Operating Temperature | -40C to +85C | β |
| Series | PROFET Industrial | β |
| RoHS Status | Compliant | β |
| Manufacturer | β | Infineon Technologies |
| Part Family | β | PROFET+2 (BTS70xxx series) |
| Function | β | Smart High-Side Power Switch |
| Number of Channels | β | 4 |
| Continuous Load Current per Channel | β | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | β | 65 mOhm typical |
| Operating Voltage Range | β | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Logic Supply Voltage | β | 3.3 V / 5 V compatible MCU I/O |
| Protection Features | β | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Diagnostic Interface | β | SPI status register, current-sense feedback |
| Operating Temperature Range | β | -40 Β°C to +150 Β°C junction |
| AEC-Q100 Qualification | β | Qualified (automotive grade) |
| RoHS Compliance | β | Compliant |