ITS711L1FUMA1 vs BTS70402EPGXUMA1 비교
다음의 상세 나란히 비교: ITS711L1FUMA1 제조: Infineon 및 BTS70402EPGXUMA1 제조: Infineon. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | ITS711L1FUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| 브랜드 | Infineon | Infineon |
| 카테고리 | Power MOSFET Drivers | Power MOSFET Drivers |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $1.98 | $3.18 |
| Switch Type | High-Side Power Switch | — |
| 출력 수 | 4 | — |
| Input:Output Ratio | 1:1 | — |
| 출력 구성 | High Side | High-side, N-channel MOSFET |
| 출력 유형 | N-Channel | — |
| Continuous Output Current (per channel) | 1.7 A | — |
| Maximum Load Current (package) | 4.4 A | — |
| Load Voltage Range | 5 V to 34 V | — |
| Supply Voltage (Vcc) | Not Required (Logic-level inputs) | — |
| Input Interface | CMOS-compatible, ground-referenced | — |
| Technology | Smart SIPMOS (vertical N-channel DMOS + CMOS logic) | — |
| On-State Resistance (Rdson) | [DATA_NEEDED: Rdson per channel] | — |
| Diagnostic Feedback | Yes (open-drain status output) | — |
| Embedded Protection | Over-load, Over-voltage, Over-temperature, Short-circuit | — |
| 패키지 | PG-DSO-20-31 (DSO-20) | PG-TSDSO-14 (exposed thermal pad) |
| 실장 유형 | Surface Mount | Surface Mount |
| 동작 온도 | -40C to +85C | — |
| Series | PROFET Industrial | — |
| RoHS 상태 | Compliant | — |
| Manufacturer | — | Infineon Technologies |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| 기능 | — | Smart High-Side Power Switch |
| Number of Channels | — | 4 |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Operating Voltage Range | — | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Protection Features | — | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| 동작 온도 범위 | — | -40 °C to +150 °C junction |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |