KSZ9021RNI vs KSZ9031RNXCA Comparison

Detailed side-by-side comparison of KSZ9021RNI by Microchip Technology and KSZ9031RNXCA by Microchip Technology. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

Microchip Technology
KSZ9031RNXCA KSZ9031RNXCA - 1GbE RGMII Transceiver | Microchip Technology

KSZ9031RNXCA - 1GbE RGMII Transceiver | Microchip Technology

KSZ9031RNXCA ✓ Active

Specification Comparison

Parameter KSZ9021RNI KSZ9031RNXCA
Brand Microchip Technology Microchip Technology
Category Interface ICs Interface ICs
Lifecycle Status NRND Active
Function Ethernet Physical Layer Transceiver (PHY) —
Data Rate 10/100/1000 Mbps (Triple Speed) —
Number of Drivers/Receivers 8/8 (4 differential pairs) —
Protocol 10Base-T, 100Base-TX, 1000Base-T (IEEE 802.3) —
MAC Interface RGMII, GMII, MII —
Supply Voltage (VDDIO) 3.135 V to 3.465 V (3.3 V typical) —
Core Supply (Internal LDO) 1.14 V to 1.26 V —
Supply Current (typ., 1000Base-T) [DATA_NEEDED: operating current] —
Cable Type CAT-5 UTP, 100 m —
Auto-MDIX Yes (HP Auto-MDIX) —
Auto-Negotiation Yes, per IEEE 802.3 clause 28 —
Jumbo Frame Support Yes —
Operating Temperature -40 C to +85 C (Industrial) —
Package 48-QFN (7x7 mm) with Exposed Pad 48-pin QFN, 7 mm x 7 mm
Mounting Type Surface Mount Surface mount
MSL Level 3 —
RoHS Status Compliant [DATA_NEEDED: RoHS status]
Lifecycle Not recommended for new designs (NRND) —
Product Type — Gigabit Ethernet physical-layer transceiver
Supported Speeds — 10 Mbps, 100 Mbps, and 1 Gbps
Supported Ethernet Modes — 10Base-T, 100Base-TX, and 1000Base-T
Host Interface — RGMII
Data Path — 4-wire full-duplex Ethernet
Supply Voltage Options — 1.8 V, 2.5 V, and 3.3 V
Analog Core Supply — 1.2 V
Cable Diagnostics — LinkMD
Time-Domain Reflectometry Diagnostics — Supported TDR-based cable testing
Mode Configuration — MODE[3:0] strap inputs
Hardware Reset Input — RESET_N, pin 42
Automotive Qualification — Automotive qualified
AVDDL Bulk Capacitance — 10 uF
AVDDL Local Decoupling — 0.1 uF per AVDDL pin
AVDDL Ferrite Bead Impedance — 100 ohm to 220 ohm at 100 MHz
Operating Temperature Range — [DATA_NEEDED: operating temperature range]
REACH Status — [DATA_NEEDED: REACH status]

Datasheets & Resources

Browse All Products Create BOM Request Quote