KSZ9021RNI vs KSZ9031RNXCA Comparaison

Comparaison détaillée côte à côte de KSZ9021RNI par Microchip Technology et KSZ9031RNXCA par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Microchip Technology
KSZ9031RNXCA KSZ9031RNXCA - 1GbE RGMII Transceiver | Microchip Technology

KSZ9031RNXCA - 1GbE RGMII Transceiver | Microchip Technology

KSZ9031RNXCA ✓ Actif

Comparaison des spécifications

Paramètre KSZ9021RNI KSZ9031RNXCA
Marque Microchip Technology Microchip Technology
Catégorie Interface ICs Interface ICs
Statut du cycle de vie NRND Actif
Fonction Ethernet Physical Layer Transceiver (PHY) —
Débit de données 10/100/1000 Mbps (Triple Speed) —
Number of Drivers/Receivers 8/8 (4 differential pairs) —
Protocol 10Base-T, 100Base-TX, 1000Base-T (IEEE 802.3) —
MAC Interface RGMII, GMII, MII —
Supply Voltage (VDDIO) 3.135 V to 3.465 V (3.3 V typical) —
Core Supply (Internal LDO) 1.14 V to 1.26 V —
Supply Current (typ., 1000Base-T) [DATA_NEEDED: operating current] —
Cable Type CAT-5 UTP, 100 m —
Auto-MDIX Yes (HP Auto-MDIX) —
Auto-Negotiation Yes, per IEEE 802.3 clause 28 —
Jumbo Frame Support Yes —
Température de fonctionnement -40 C to +85 C (Industrial) —
Boîtier 48-QFN (7x7 mm) with Exposed Pad 48-pin QFN, 7 mm x 7 mm
Type de montage Surface Mount Surface mount
Niveau MSL 3 —
Statut RoHS Compliant [DATA_NEEDED: RoHS status]
Lifecycle Not recommended for new designs (NRND) —
Product Type — Gigabit Ethernet physical-layer transceiver
Supported Speeds — 10 Mbps, 100 Mbps, and 1 Gbps
Supported Ethernet Modes — 10Base-T, 100Base-TX, and 1000Base-T
Host Interface — RGMII
Data Path — 4-wire full-duplex Ethernet
Supply Voltage Options — 1.8 V, 2.5 V, and 3.3 V
Analog Core Supply — 1.2 V
Cable Diagnostics — LinkMD
Time-Domain Reflectometry Diagnostics — Supported TDR-based cable testing
Mode Configuration — MODE[3:0] strap inputs
Hardware Reset Input — RESET_N, pin 42
Automotive Qualification — Automotive qualified
AVDDL Bulk Capacitance — 10 uF
AVDDL Local Decoupling — 0.1 uF per AVDDL pin
AVDDL Ferrite Bead Impedance — 100 ohm to 220 ohm at 100 MHz
Plage de température de fonctionnement — [DATA_NEEDED: operating temperature range]
REACH Status — [DATA_NEEDED: REACH status]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis