KSZ9031RNXCA vs KSZ9021RNI Comparison
Detailed side-by-side comparison of KSZ9031RNXCA by Microchip Technology and KSZ9021RNI by Microchip Technology. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Microchip Technology
KSZ9031RNXCA - 1GbE RGMII Transceiver | Microchip Technology
KSZ9031RNXCA ✓ ActiveMicrochip Technology
KSZ9021RNI - Gigabit Ethernet PHY Transceiver, RGMII, QFN-48 | Microchip
KSZ9021RNI NrndSpecification Comparison
| Parameter | KSZ9031RNXCA | KSZ9021RNI |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | NRND |
| Product Type | Gigabit Ethernet physical-layer transceiver | — |
| Supported Speeds | 10 Mbps, 100 Mbps, and 1 Gbps | — |
| Supported Ethernet Modes | 10Base-T, 100Base-TX, and 1000Base-T | — |
| Host Interface | RGMII | — |
| Data Path | 4-wire full-duplex Ethernet | — |
| Supply Voltage Options | 1.8 V, 2.5 V, and 3.3 V | — |
| Analog Core Supply | 1.2 V | — |
| Package | 48-pin QFN, 7 mm x 7 mm | 48-QFN (7x7 mm) with Exposed Pad |
| Mounting Type | Surface mount | Surface Mount |
| Cable Diagnostics | LinkMD | — |
| Time-Domain Reflectometry Diagnostics | Supported TDR-based cable testing | — |
| Mode Configuration | MODE[3:0] strap inputs | — |
| Hardware Reset Input | RESET_N, pin 42 | — |
| Automotive Qualification | Automotive qualified | — |
| AVDDL Bulk Capacitance | 10 uF | — |
| AVDDL Local Decoupling | 0.1 uF per AVDDL pin | — |
| AVDDL Ferrite Bead Impedance | 100 ohm to 220 ohm at 100 MHz | — |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Function | — | Ethernet Physical Layer Transceiver (PHY) |
| Data Rate | — | 10/100/1000 Mbps (Triple Speed) |
| Number of Drivers/Receivers | — | 8/8 (4 differential pairs) |
| Protocol | — | 10Base-T, 100Base-TX, 1000Base-T (IEEE 802.3) |
| MAC Interface | — | RGMII, GMII, MII |
| Supply Voltage (VDDIO) | — | 3.135 V to 3.465 V (3.3 V typical) |
| Core Supply (Internal LDO) | — | 1.14 V to 1.26 V |
| Supply Current (typ., 1000Base-T) | — | [DATA_NEEDED: operating current] |
| Cable Type | — | CAT-5 UTP, 100 m |
| Auto-MDIX | — | Yes (HP Auto-MDIX) |
| Auto-Negotiation | — | Yes, per IEEE 802.3 clause 28 |
| Jumbo Frame Support | — | Yes |
| Operating Temperature | — | -40 C to +85 C (Industrial) |
| MSL Level | — | 3 |
| Lifecycle | — | Not recommended for new designs (NRND) |