KSZ9031RNXCA vs KSZ9021RNI Perbandingan
Perbandingan bersamaan detil KSZ9031RNXCA dari Microchip Technology dan KSZ9021RNI dari Microchip Technology. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Microchip Technology
KSZ9031RNXCA - 1GbE RGMII Transceiver | Microchip Technology
KSZ9031RNXCA ✓ AktifMicrochip Technology
KSZ9021RNI - Gigabit Ethernet PHY Transceiver, RGMII, QFN-48 | Microchip
KSZ9021RNI NrndPerbandingan Spesifikasi
| Parameter Umum | KSZ9031RNXCA | KSZ9021RNI |
|---|---|---|
| Merek | Microchip Technology | Microchip Technology |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | NRND |
| Product Type | Gigabit Ethernet physical-layer transceiver | — |
| Supported Speeds | 10 Mbps, 100 Mbps, and 1 Gbps | — |
| Supported Ethernet Modes | 10Base-T, 100Base-TX, and 1000Base-T | — |
| Host Interface | RGMII | — |
| Data Path | 4-wire full-duplex Ethernet | — |
| Supply Voltage Options | 1.8 V, 2.5 V, and 3.3 V | — |
| Analog Core Supply | 1.2 V | — |
| Paket | 48-pin QFN, 7 mm x 7 mm | 48-QFN (7x7 mm) with Exposed Pad |
| Tipe Mounting | Surface mount | Surface Mount |
| Cable Diagnostics | LinkMD | — |
| Time-Domain Reflectometry Diagnostics | Supported TDR-based cable testing | — |
| Mode Configuration | MODE[3:0] strap inputs | — |
| Hardware Reset Input | RESET_N, pin 42 | — |
| Automotive Qualification | Automotive qualified | — |
| AVDDL Bulk Capacitance | 10 uF | — |
| AVDDL Local Decoupling | 0.1 uF per AVDDL pin | — |
| AVDDL Ferrite Bead Impedance | 100 ohm to 220 ohm at 100 MHz | — |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Fungsi | — | Ethernet Physical Layer Transceiver (PHY) |
| Laju Data | — | 10/100/1000 Mbps (Triple Speed) |
| Number of Drivers/Receivers | — | 8/8 (4 differential pairs) |
| Protocol | — | 10Base-T, 100Base-TX, 1000Base-T (IEEE 802.3) |
| MAC Interface | — | RGMII, GMII, MII |
| Supply Voltage (VDDIO) | — | 3.135 V to 3.465 V (3.3 V typical) |
| Core Supply (Internal LDO) | — | 1.14 V to 1.26 V |
| Supply Current (typ., 1000Base-T) | — | [DATA_NEEDED: operating current] |
| Cable Type | — | CAT-5 UTP, 100 m |
| Auto-MDIX | — | Yes (HP Auto-MDIX) |
| Auto-Negotiation | — | Yes, per IEEE 802.3 clause 28 |
| Jumbo Frame Support | — | Yes |
| Suhu Kerja | — | -40 C to +85 C (Industrial) |
| Level MSL | — | 3 |
| Lifecycle | — | Not recommended for new designs (NRND) |