KSZ9031RNXIC vs KSZ9031RNXCA Comparison
Detailed side-by-side comparison of KSZ9031RNXIC by Microchip Technology and KSZ9031RNXCA by Microchip Technology. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Microchip Technology
KSZ9031RNXIC - Gigabit Ethernet PHY Transceiver, RGMII, 48-QFN | Microchip
KSZ9031RNXIC ✓ ActiveMicrochip Technology
KSZ9031RNXCA - 1GbE RGMII Transceiver | Microchip Technology
KSZ9031RNXCA ✓ ActiveSpecification Comparison
| Parameter | KSZ9031RNXIC | KSZ9031RNXCA |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Product Type | Ethernet Physical Layer Transceiver (PHY) | Gigabit Ethernet physical-layer transceiver |
| Data Rate | 10/100/1000 Mbps (Triple-Speed) | — |
| Network Standard | IEEE 802.3 10BASE-T / 100BASE-TX / 1000BASE-T | — |
| Interface to MAC | RGMII (version 2.0, on-chip delay) | — |
| Number of Channels | 4/4 Transceiver (Full Duplex) | — |
| Supply Voltage | 1.8 V / 2.5 V / 3.3 V | — |
| Package | 48-pin QFN (7x7 mm) with Exposed Pad | 48-pin QFN, 7 mm x 7 mm |
| Cable Type | CAT-5 Unshielded Twisted Pair (UTP) | — |
| Auto-Negotiation | Yes (IEEE 802.3u/clause 28) | — |
| Auto-MDI/MDIX | Yes | — |
| Cable Diagnostics | LinkMD TDR-based cable diagnostics | LinkMD |
| Wake-on-LAN | Yes (Magic Packet and wake-up frame) | — |
| Jumbo Frame Support | Yes (up to 9 KB) | — |
| Operating Temperature Range | -40 C to +85 C (Industrial) | [DATA_NEEDED: operating temperature range] |
| Mounting Type | Surface Mount | Surface mount |
| MSL Level | MSL3 (per JEDEC J-STD-020) | — |
| RoHS Status | Compliant | [DATA_NEEDED: RoHS status] |
| Reference Clock | 25 MHz crystal or LVCMOS input | — |
| Supported Speeds | — | 10 Mbps, 100 Mbps, and 1 Gbps |
| Supported Ethernet Modes | — | 10Base-T, 100Base-TX, and 1000Base-T |
| Host Interface | — | RGMII |
| Data Path | — | 4-wire full-duplex Ethernet |
| Supply Voltage Options | — | 1.8 V, 2.5 V, and 3.3 V |
| Analog Core Supply | — | 1.2 V |
| Time-Domain Reflectometry Diagnostics | — | Supported TDR-based cable testing |
| Mode Configuration | — | MODE[3:0] strap inputs |
| Hardware Reset Input | — | RESET_N, pin 42 |
| Automotive Qualification | — | Automotive qualified |
| AVDDL Bulk Capacitance | — | 10 uF |
| AVDDL Local Decoupling | — | 0.1 uF per AVDDL pin |
| AVDDL Ferrite Bead Impedance | — | 100 ohm to 220 ohm at 100 MHz |
| REACH Status | — | [DATA_NEEDED: REACH status] |