KSZ9031RNXIC vs KSZ9031RNXCA Comparaison

Comparaison détaillée côte à côte de KSZ9031RNXIC par Microchip Technology et KSZ9031RNXCA par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Microchip Technology
KSZ9031RNXCA KSZ9031RNXCA - 1GbE RGMII Transceiver | Microchip Technology

KSZ9031RNXCA - 1GbE RGMII Transceiver | Microchip Technology

KSZ9031RNXCA ✓ Actif

Comparaison des spécifications

Paramètre KSZ9031RNXIC KSZ9031RNXCA
Marque Microchip Technology Microchip Technology
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Product Type Ethernet Physical Layer Transceiver (PHY) Gigabit Ethernet physical-layer transceiver
Débit de données 10/100/1000 Mbps (Triple-Speed) —
Network Standard IEEE 802.3 10BASE-T / 100BASE-TX / 1000BASE-T —
Interface to MAC RGMII (version 2.0, on-chip delay) —
Number of Channels 4/4 Transceiver (Full Duplex) —
Tension d'alimentation 1.8 V / 2.5 V / 3.3 V —
Boîtier 48-pin QFN (7x7 mm) with Exposed Pad 48-pin QFN, 7 mm x 7 mm
Cable Type CAT-5 Unshielded Twisted Pair (UTP) —
Auto-Negotiation Yes (IEEE 802.3u/clause 28) —
Auto-MDI/MDIX Yes —
Cable Diagnostics LinkMD TDR-based cable diagnostics LinkMD
Wake-on-LAN Yes (Magic Packet and wake-up frame) —
Jumbo Frame Support Yes (up to 9 KB) —
Plage de température de fonctionnement -40 C to +85 C (Industrial) [DATA_NEEDED: operating temperature range]
Type de montage Surface Mount Surface mount
Niveau MSL MSL3 (per JEDEC J-STD-020) —
Statut RoHS Compliant [DATA_NEEDED: RoHS status]
Reference Clock 25 MHz crystal or LVCMOS input —
Supported Speeds — 10 Mbps, 100 Mbps, and 1 Gbps
Supported Ethernet Modes — 10Base-T, 100Base-TX, and 1000Base-T
Host Interface — RGMII
Data Path — 4-wire full-duplex Ethernet
Supply Voltage Options — 1.8 V, 2.5 V, and 3.3 V
Analog Core Supply — 1.2 V
Time-Domain Reflectometry Diagnostics — Supported TDR-based cable testing
Mode Configuration — MODE[3:0] strap inputs
Hardware Reset Input — RESET_N, pin 42
Automotive Qualification — Automotive qualified
AVDDL Bulk Capacitance — 10 uF
AVDDL Local Decoupling — 0.1 uF per AVDDL pin
AVDDL Ferrite Bead Impedance — 100 ohm to 220 ohm at 100 MHz
REACH Status — [DATA_NEEDED: REACH status]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis