LM258DR2G vs LM324ADR Comparison
Detailed side-by-side comparison of LM258DR2G by onsemi and LM324ADR by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
LM324ADR - Quad 30V 1.2MHz Op Amp | Texas Instruments (Tape & Reel)
LM324ADR ✓ ActiveSpecification Comparison
| Parameter | LM258DR2G | LM324ADR |
|---|---|---|
| Brand | onsemi | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Number of Amplifier Channels | 2 channels | — |
| Supply Voltage Range | 3 V to 32 V | — |
| Slew Rate | 0.6 V/µs | [DATA_NEEDED: slew rate] |
| Operating Temperature Range | -25°C to +85°C | 0 C to +70 C |
| Typical Supply-Current Drain | 0.7 mA | — |
| Typical Input Offset Voltage | 2 mV | — |
| Typical Input Offset Current | 2 nA | — |
| Typical Input Bias Current | 15 nA | — |
| Differential Input Voltage Range | 32 V | — |
| Common-Mode Input Range | Extends to ground and VEE | — |
| Compensation | Internal frequency compensation | — |
| Supply Configuration | Single supply or split supply | Single supply or split supply |
| Package | 8-pin SOIC | 14-pin SOIC (D) |
| Mounting Type | Surface mount | Surface mount |
| Product Classification | General-purpose operational amplifier | — |
| RoHS Status | ROHS3 compliant | [DATA_NEEDED: RoHS status] |
| REACH Status | Unaffected | [DATA_NEEDED: REACH status] |
| Moisture Sensitivity Level | MSL 1 (unlimited) | — |
| Number of Amplifier Circuits | — | 4 circuits |
| Maximum Supply Voltage | — | 30 V |
| Gain-Bandwidth Product | — | 1.2 MHz |
| Input Offset Voltage | — | 3 mV |
| Internal Frequency Compensation | — | Internally compensated |
| Differential Input Type | — | True differential inputs |
| Number of Pins | — | 14 pins |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Output Current | — | [DATA_NEEDED: output current] |
| Quiescent Current per Amplifier | — | [DATA_NEEDED: quiescent current per amplifier] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |