LM258DR2G vs LM324ADR مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ LM258DR2G بواسطة onsemi و LM324ADR بواسطة Texas Instruments. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
Texas Instruments
LM324ADR - Quad 30V 1.2MHz Op Amp | Texas Instruments (Tape & Reel)
LM324ADR ✓ نشطمقارنة المواصفات
| المعامل | LM258DR2G | LM324ADR |
|---|---|---|
| العلامة التجارية | onsemi | Texas Instruments |
| الفئة | Amplifier ICs | Amplifier ICs |
| حالة دورة الحياة | نشط | نشط |
| Number of Amplifier Channels | 2 channels | — |
| Supply Voltage Range | 3 V to 32 V | — |
| Slew Rate | 0.6 V/µs | [DATA_NEEDED: slew rate] |
| نطاق درجة حرارة التشغيل | -25°C to +85°C | 0 C to +70 C |
| Typical Supply-Current Drain | 0.7 mA | — |
| Typical Input Offset Voltage | 2 mV | — |
| Typical Input Offset Current | 2 nA | — |
| Typical Input Bias Current | 15 nA | — |
| Differential Input Voltage Range | 32 V | — |
| Common-Mode Input Range | Extends to ground and VEE | — |
| Compensation | Internal frequency compensation | — |
| Supply Configuration | Single supply or split supply | Single supply or split supply |
| العلبة | 8-pin SOIC | 14-pin SOIC (D) |
| نوع التركيب | Surface mount | Surface mount |
| Product Classification | General-purpose operational amplifier | — |
| حالة RoHS | ROHS3 compliant | [DATA_NEEDED: RoHS status] |
| REACH Status | Unaffected | [DATA_NEEDED: REACH status] |
| Moisture Sensitivity Level | MSL 1 (unlimited) | — |
| Number of Amplifier Circuits | — | 4 circuits |
| Maximum Supply Voltage | — | 30 V |
| Gain-Bandwidth Product | — | 1.2 MHz |
| Input Offset Voltage | — | 3 mV |
| Internal Frequency Compensation | — | Internally compensated |
| Differential Input Type | — | True differential inputs |
| عدد الدبابيس | — | 14 pins |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Output Current | — | [DATA_NEEDED: output current] |
| Quiescent Current per Amplifier | — | [DATA_NEEDED: quiescent current per amplifier] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |