LM258PG4 vs TL072CP Comparison
Detailed side-by-side comparison of LM258PG4 by Texas Instruments and TL072CP by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
TL072CP - Dual JFET-Input Low-Noise Op Amp, 8-PDIP | Texas Instruments
TL072CP ✓ ActiveSpecification Comparison
| Parameter | LM258PG4 | TL072CP |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Amplifier Type | General-purpose dual operational amplifier | JFET-Input Operational Amplifier |
| Number of Channels | 2 channels | — |
| Maximum Supply Voltage | 30 V | — |
| Single-Supply Operating Range | 3 V to 32 V | — |
| Operating Temperature Range | -25°C to +85°C | 0°C to +70°C (C grade) |
| Gain-Bandwidth Product | 700 kHz | — |
| Slew Rate | 0.3 V/µs | 13 V/µs (typical) |
| Quiescent Current | 500 µA per channel | — |
| Frequency Compensation | Internally compensated | — |
| Package | 8-pin PDIP | — |
| Mounting Type | Through-hole | Through Hole |
| Operating Voltage | 3 V to 32 V | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | 3 mV (typical, C grade) |
| Input Bias Current | [DATA_NEEDED: input bias current] | 30 pA (typical) |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| Output Current | [DATA_NEEDED: output current] | — |
| Noise Density | [DATA_NEEDED: noise density] | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Manufacturer | — | Texas Instruments |
| Part Status | — | Active |
| Number of Circuits | — | 2 (Dual) |
| Gain Bandwidth Product | — | 3 MHz (typical) |
| Input Noise Voltage Density | — | 18 nV/√Hz (typical at 1 kHz) |
| Total Harmonic Distortion | — | 0.003% (typical) |
| Supply Voltage Range (Dual) | — | ±3.5 V to ±18 V |
| Supply Voltage Range (Single) | — | 7 V to 36 V |
| Package / Case | — | 8-PDIP (Plastic DIP, through-hole) |
| Pin Count | — | 8 |
| Output Short-Circuit Protection | — | Yes |
| Internal Frequency Compensation | — | Yes |
| Latch-up Free Operation | — | Yes |