LM258PG4 vs TL072CP Comparação
Comparação detalhada lado a lado de LM258PG4 por Texas Instruments e TL072CP por Texas Instruments. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Texas Instruments
TL072CP - Dual JFET-Input Low-Noise Op Amp, 8-PDIP | Texas Instruments
TL072CP ✓ AtivoComparação de especificações
| Parâmetro | LM258PG4 | TL072CP |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoria | Amplifier ICs | Amplifier ICs |
| Status do ciclo de vida | Ativo | Ativo |
| Amplifier Type | General-purpose dual operational amplifier | JFET-Input Operational Amplifier |
| Number of Channels | 2 channels | — |
| Maximum Supply Voltage | 30 V | — |
| Single-Supply Operating Range | 3 V to 32 V | — |
| Faixa de temperatura de operação | -25°C to +85°C | 0°C to +70°C (C grade) |
| Gain-Bandwidth Product | 700 kHz | — |
| Slew Rate | 0.3 V/µs | 13 V/µs (typical) |
| Corrente de repouso | 500 µA per channel | — |
| Frequency Compensation | Internally compensated | — |
| Encapsulamento | 8-pin PDIP | — |
| Tipo de montagem | Through-hole | Through Hole |
| Operating Voltage | 3 V to 32 V | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | 3 mV (typical, C grade) |
| Input Bias Current | [DATA_NEEDED: input bias current] | 30 pA (typical) |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| Output Current | [DATA_NEEDED: output current] | — |
| Densidade de ruído | [DATA_NEEDED: noise density] | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Manufacturer | — | Texas Instruments |
| Part Status | — | Active |
| Number of Circuits | — | 2 (Dual) |
| Gain Bandwidth Product | — | 3 MHz (typical) |
| Input Noise Voltage Density | — | 18 nV/√Hz (typical at 1 kHz) |
| Total Harmonic Distortion | — | 0.003% (typical) |
| Supply Voltage Range (Dual) | — | ±3.5 V to ±18 V |
| Supply Voltage Range (Single) | — | 7 V to 36 V |
| Encapsulamento / Caixa | — | 8-PDIP (Plastic DIP, through-hole) |
| Contagem de pinos | — | 8 |
| Output Short-Circuit Protection | — | Yes |
| Internal Frequency Compensation | — | Yes |
| Latch-up Free Operation | — | Yes |