LM2901DG vs LM2901DG4 Comparison
Detailed side-by-side comparison of LM2901DG by onsemi and LM2901DG4 by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
LM2901DG4 - 30V Quad Differential Comparator | Texas Instruments
LM2901DG4 ✓ ActiveSpecification Comparison
| Parameter | LM2901DG | LM2901DG4 |
|---|---|---|
| Brand | onsemi | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Comparator Type | General Purpose | Quad differential comparator |
| Number of Comparators | 4 | — |
| Single-Supply Voltage Range | 3 V to 36 V | — |
| Dual-Supply Voltage Range | ±1.5 V to ±18 V | — |
| Response Time | 1.3 us | 300 ns |
| Output Type | Open Collector | Open collector |
| Output Compatibility | CMOS, TTL | — |
| Supply Current | 1 mA | 200 µA per comparator |
| Maximum Input Bias Current | 0.25 uA at 5 V | — |
| Typical Low Input Bias Current | 25 nA | — |
| Typical Input Offset Current | ±5 nA | — |
| Typical Low Output Saturation Voltage | 130 mV at 4 mA | — |
| Operating Temperature Range | -40°C to +105°C | — |
| Package | 14-SOIC | 14-pin SOIC, 3.90 mm width |
| Mounting Type | Surface Mount | Surface mount |
| RoHS Status | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | not_applicable |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Number of Channels | — | 4 channels |
| Nominal Supply Voltage | — | 30 V |
| Operating Supply Voltage Range | — | 2 V to 36 V |
| Maximum Supply Voltage | — | 38 V |
| Input Offset Voltage | — | 0.37 mV |
| Input Bias Current | — | 3.5 nA |
| Common-Mode Input Range | — | Includes ground |
| Differential Input Voltage Range | — | Up to ±38 V |
| Logic Compatibility | — | TTL, MOS, and CMOS |
| ESD Rating, HBM | — | 2 kV |