LM2901DG4 vs LM2901DG Comparison
Detailed side-by-side comparison of LM2901DG4 by Texas Instruments and LM2901DG by onsemi. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
LM2901DG4 - 30V Quad Differential Comparator | Texas Instruments
LM2901DG4 ✓ ActiveSpecification Comparison
| Parameter | LM2901DG4 | LM2901DG |
|---|---|---|
| Brand | Texas Instruments | onsemi |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Comparator Type | Quad differential comparator | General Purpose |
| Number of Channels | 4 channels | — |
| Nominal Supply Voltage | 30 V | — |
| Operating Supply Voltage Range | 2 V to 36 V | — |
| Maximum Supply Voltage | 38 V | — |
| Input Offset Voltage | 0.37 mV | — |
| Input Bias Current | 3.5 nA | — |
| Supply Current | 200 µA per comparator | 1 mA |
| Response Time | 300 ns | 1.3 us |
| Output Type | Open collector | Open Collector |
| Common-Mode Input Range | Includes ground | — |
| Differential Input Voltage Range | Up to ±38 V | — |
| Logic Compatibility | TTL, MOS, and CMOS | — |
| ESD Rating, HBM | 2 kV | — |
| Package | 14-pin SOIC, 3.90 mm width | 14-SOIC |
| Mounting Type | Surface mount | Surface Mount |
| RoHS Status | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | not_applicable | [DATA_NEEDED: AEC-Q100 qualification] |
| Number of Comparators | — | 4 |
| Single-Supply Voltage Range | — | 3 V to 36 V |
| Dual-Supply Voltage Range | — | ±1.5 V to ±18 V |
| Output Compatibility | — | CMOS, TTL |
| Maximum Input Bias Current | — | 0.25 uA at 5 V |
| Typical Low Input Bias Current | — | 25 nA |
| Typical Input Offset Current | — | ±5 nA |
| Typical Low Output Saturation Voltage | — | 130 mV at 4 mA |
| Operating Temperature Range | — | -40°C to +105°C |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |