LM2901NG vs LM2901M Comparison
Detailed side-by-side comparison of LM2901NG by onsemi and LM2901M by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
LM2901M - 4-Channel 36V Open-Collector Comparator | Texas Instruments
LM2901M ✓ ActiveSpecification Comparison
| Parameter | LM2901NG | LM2901M |
|---|---|---|
| Brand | onsemi | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Comparator Type | Quad differential comparator | 4-channel differential analog comparator |
| Number of Channels | 4 channels | 4 channels |
| Supply Voltage Range | 3 V to 36 V | — |
| Supply Configuration | Single supply | — |
| Output Type | Open collector | Open-collector |
| Logic Compatibility | TTL and CMOS | — |
| Output Saturation Voltage | 130 mV at 4 mA | — |
| Common-Mode Input Range | Includes ground | — |
| Operating Temperature Range | -40°C to 105°C | [DATA_NEEDED: operating temperature range] |
| Input ESD Protection | ESD clamps on inputs | — |
| Package Type | 14-pin PDIP | — |
| Mounting Type | Through-hole | Surface Mount |
| Manufacturer | onsemi | — |
| Device Classification | Standard general-purpose comparator | — |
| Typical Applications | Level detection, low-level sensing, and memory applications | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Supply Current | [DATA_NEEDED: supply current] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Differential Input Voltage | [DATA_NEEDED: differential input voltage] | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification status] |
| Single-Supply Operating Voltage Range | — | 2 V to 36 V |
| Dual-Supply Operating Voltage Range | — | Approximately ±1 V to ±18 V |
| Typical Response Time | — | 1.3 µs |
| Typical Supply Current Drain | — | 800 µA |
| Typical Input Bias Current | — | 25 nA |
| Typical Input Offset Voltage | — | 7 mV |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Low-Level Compatibility | — | Compatible with TTL, MOS, and CMOS logic |
| Package | — | 14-pin SOIC |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |
| Conflict-Minerals Status | — | [DATA_NEEDED: conflict-minerals compliance status] |
| Operating Principle | — | Single-supply or dual-supply operation |