LM2901NG vs LM2901M Comparación
Comparación detallada lado a lado de LM2901NG por onsemi y LM2901M por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
LM2901M - 4-Channel 36V Open-Collector Comparator | Texas Instruments
LM2901M ✓ ActivoComparación de especificaciones
| Parámetro | LM2901NG | LM2901M |
|---|---|---|
| Marca | onsemi | Texas Instruments |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Comparator Type | Quad differential comparator | 4-channel differential analog comparator |
| Number of Channels | 4 channels | 4 channels |
| Supply Voltage Range | 3 V to 36 V | — |
| Supply Configuration | Single supply | — |
| Tipo de salida | Open collector | Open-collector |
| Logic Compatibility | TTL and CMOS | — |
| Output Saturation Voltage | 130 mV at 4 mA | — |
| Common-Mode Input Range | Includes ground | — |
| Rango de temperatura de funcionamiento | -40°C to 105°C | [DATA_NEEDED: operating temperature range] |
| Input ESD Protection | ESD clamps on inputs | — |
| Package Type | 14-pin PDIP | — |
| Tipo de montaje | Through-hole | Surface Mount |
| Manufacturer | onsemi | — |
| Device Classification | Standard general-purpose comparator | — |
| Typical Applications | Level detection, low-level sensing, and memory applications | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Corriente de alimentación | [DATA_NEEDED: supply current] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Differential Input Voltage | [DATA_NEEDED: differential input voltage] | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification status] |
| Single-Supply Operating Voltage Range | — | 2 V to 36 V |
| Dual-Supply Operating Voltage Range | — | Approximately ±1 V to ±18 V |
| Typical Response Time | — | 1.3 µs |
| Typical Supply Current Drain | — | 800 µA |
| Typical Input Bias Current | — | 25 nA |
| Typical Input Offset Voltage | — | 7 mV |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Low-Level Compatibility | — | Compatible with TTL, MOS, and CMOS logic |
| Encapsulado | — | 14-pin SOIC |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |
| Conflict-Minerals Status | — | [DATA_NEEDED: conflict-minerals compliance status] |
| Operating Principle | — | Single-supply or dual-supply operation |