LM2902KDBR vs LM2902KDG4 Comparison
Detailed side-by-side comparison of LM2902KDBR by Texas Instruments and LM2902KDG4 by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
LM2902KDBR - Quad 26V 1.2MHz Op Amp | Texas Instruments (Tape & Reel)
LM2902KDBR ✓ ActiveSpecification Comparison
| Parameter | LM2902KDBR | LM2902KDG4 |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | End of Life |
| Number of Amplifier Channels | 4 channels | 4 channels |
| Amplifier Type | General-purpose operational amplifier | — |
| Maximum Supply Voltage | 26 V | 26 V |
| Gain-Bandwidth Product | 1.2 MHz | 1.2 MHz |
| ESD Protection | 2 kV improved ESD | — |
| Typical Input Offset Voltage | 3 mV | — |
| Typical Input Offset Current | 2 nA | — |
| Typical Supply-Current Drain | 0.8 mA | — |
| Common-Mode Input Range | Includes ground | [DATA_NEEDED: common-mode input range] |
| Operating Temperature Range | -40°C to +125°C | [DATA_NEEDED: operating temperature range] |
| Package | 14-pin SSOP (DB) | 14-SOIC |
| Package Width | 5.30 mm | — |
| Mounting Type | Surface mount | Through-hole |
| Device Family | LM2902K improved LM2902B generation | — |
| RoHS Status | Unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | Unknown | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | Unknown | — |
| Lead-Free Status | Unknown | — |
| Total Supply Voltage | [DATA_NEEDED: total supply voltage including ground connection] | — |
| Output Current | [DATA_NEEDED: output current] | [DATA_NEEDED: output current] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Slew Rate | [DATA_NEEDED: slew rate] | [DATA_NEEDED: slew rate] |
| Open-Loop Gain | [DATA_NEEDED: open-loop gain] | — |
| Unity-Gain Bandwidth | [DATA_NEEDED: unity-gain bandwidth] | — |
| Product Type | — | General-purpose operational amplifier |
| Improved ESD Capability | — | 2 kV |
| Package Body Width | — | 3.90 mm (0.154 inch) |
| Number of Pins | — | 14 pins |
| Channel 1 Output Pin | — | Pin 1 |
| Channel 2 Output Pin | — | Pin 7 |
| Channel 3 Output Pin | — | Pin 8 |
| Channel 4 Output Pin | — | Pin 14 |
| Positive Supply Pin | — | Pin 12 |
| Negative Supply Pin | — | Pin 4 |
| Supply Current | — | [DATA_NEEDED: supply current] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |