LM2902KDBR vs LM2902KDG4 Comparaison
Comparaison détaillée côte à côte de LM2902KDBR par Texas Instruments et LM2902KDG4 par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
LM2902KDBR - Quad 26V 1.2MHz Op Amp | Texas Instruments (Tape & Reel)
LM2902KDBR ✓ ActifComparaison des spécifications
| Paramètre | LM2902KDBR | LM2902KDG4 |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Fin de vie |
| Number of Amplifier Channels | 4 channels | 4 channels |
| Amplifier Type | General-purpose operational amplifier | — |
| Maximum Supply Voltage | 26 V | 26 V |
| Gain-Bandwidth Product | 1.2 MHz | 1.2 MHz |
| ESD Protection | 2 kV improved ESD | — |
| Typical Input Offset Voltage | 3 mV | — |
| Typical Input Offset Current | 2 nA | — |
| Typical Supply-Current Drain | 0.8 mA | — |
| Common-Mode Input Range | Includes ground | [DATA_NEEDED: common-mode input range] |
| Plage de température de fonctionnement | -40°C to +125°C | [DATA_NEEDED: operating temperature range] |
| Boîtier | 14-pin SSOP (DB) | 14-SOIC |
| Package Width | 5.30 mm | — |
| Type de montage | Surface mount | Through-hole |
| Device Family | LM2902K improved LM2902B generation | — |
| Statut RoHS | Unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | Unknown | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | Unknown | — |
| Lead-Free Status | Unknown | — |
| Total Supply Voltage | [DATA_NEEDED: total supply voltage including ground connection] | — |
| Output Current | [DATA_NEEDED: output current] | [DATA_NEEDED: output current] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Slew Rate | [DATA_NEEDED: slew rate] | [DATA_NEEDED: slew rate] |
| Open-Loop Gain | [DATA_NEEDED: open-loop gain] | — |
| Unity-Gain Bandwidth | [DATA_NEEDED: unity-gain bandwidth] | — |
| Product Type | — | General-purpose operational amplifier |
| Improved ESD Capability | — | 2 kV |
| Package Body Width | — | 3.90 mm (0.154 inch) |
| Nombre de broches | — | 14 pins |
| Channel 1 Output Pin | — | Pin 1 |
| Channel 2 Output Pin | — | Pin 7 |
| Channel 3 Output Pin | — | Pin 8 |
| Channel 4 Output Pin | — | Pin 14 |
| Positive Supply Pin | — | Pin 12 |
| Negative Supply Pin | — | Pin 4 |
| Courant d'alimentation | — | [DATA_NEEDED: supply current] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |