LM2902KVQDR vs LM2902KDBR Comparison
Detailed side-by-side comparison of LM2902KVQDR by Texas Instruments and LM2902KDBR by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
LM2902KDBR - Quad 26V 1.2MHz Op Amp | Texas Instruments (Tape & Reel)
LM2902KDBR ✓ ActiveSpecification Comparison
| Parameter | LM2902KVQDR | LM2902KDBR |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Amplifier Type | Quad general-purpose operational amplifier | General-purpose operational amplifier |
| Number of Amplifiers | 4 amplifiers | — |
| Number of Circuits | 4 circuits | — |
| Maximum Supply Voltage | 30 V | 26 V |
| Gain-Bandwidth Product | 1.2 MHz | 1.2 MHz |
| Improved ESD Protection | 2 kV | — |
| Operating Temperature Range | -40°C to +125°C | -40°C to +125°C |
| Package | 14-pin SOIC | 14-pin SSOP (DB) |
| Mounting Type | Surface mount | Surface mount |
| Input Offset Voltage | 600 µV typical | — |
| Common-Mode Input Range | To ground | Includes ground |
| Differential Input Voltage Capability | High differential input voltage capability | — |
| Supply Configuration | Single supply or split supply | — |
| Compensation | Internally frequency compensated | — |
| Channel Independence | 4 independent amplifiers | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | Unknown |
| REACH Status | [DATA_NEEDED: REACH status] | Unknown |
| Number of Amplifier Channels | — | 4 channels |
| ESD Protection | — | 2 kV improved ESD |
| Typical Input Offset Voltage | — | 3 mV |
| Typical Input Offset Current | — | 2 nA |
| Typical Supply-Current Drain | — | 0.8 mA |
| Package Width | — | 5.30 mm |
| Device Family | — | LM2902K improved LM2902B generation |
| AEC-Q100 Qualification | — | Unknown |
| Lead-Free Status | — | Unknown |
| Total Supply Voltage | — | [DATA_NEEDED: total supply voltage including ground connection] |
| Output Current | — | [DATA_NEEDED: output current] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Slew Rate | — | [DATA_NEEDED: slew rate] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain] |
| Unity-Gain Bandwidth | — | [DATA_NEEDED: unity-gain bandwidth] |