LM2902KVQDR vs LM2902KDBR Perbandingan
Perbandingan bersamaan detil LM2902KVQDR dari Texas Instruments dan LM2902KDBR dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
LM2902KDBR - Quad 26V 1.2MHz Op Amp | Texas Instruments (Tape & Reel)
LM2902KDBR ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | LM2902KVQDR | LM2902KDBR |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Amplifier Type | Quad general-purpose operational amplifier | General-purpose operational amplifier |
| Number of Amplifiers | 4 amplifiers | — |
| Number of Circuits | 4 circuits | — |
| Maximum Supply Voltage | 30 V | 26 V |
| Gain-Bandwidth Product | 1.2 MHz | 1.2 MHz |
| Improved ESD Protection | 2 kV | — |
| Rentang Suhu Kerja | -40°C to +125°C | -40°C to +125°C |
| Paket | 14-pin SOIC | 14-pin SSOP (DB) |
| Tipe Mounting | Surface mount | Surface mount |
| Input Offset Voltage | 600 µV typical | — |
| Common-Mode Input Range | To ground | Includes ground |
| Differential Input Voltage Capability | High differential input voltage capability | — |
| Supply Configuration | Single supply or split supply | — |
| Compensation | Internally frequency compensated | — |
| Channel Independence | 4 independent amplifiers | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | Unknown |
| REACH Status | [DATA_NEEDED: REACH status] | Unknown |
| Number of Amplifier Channels | — | 4 channels |
| ESD Protection | — | 2 kV improved ESD |
| Typical Input Offset Voltage | — | 3 mV |
| Typical Input Offset Current | — | 2 nA |
| Typical Supply-Current Drain | — | 0.8 mA |
| Package Width | — | 5.30 mm |
| Device Family | — | LM2902K improved LM2902B generation |
| AEC-Q100 Qualification | — | Unknown |
| Lead-Free Status | — | Unknown |
| Total Supply Voltage | — | [DATA_NEEDED: total supply voltage including ground connection] |
| Output Current | — | [DATA_NEEDED: output current] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Slew Rate | — | [DATA_NEEDED: slew rate] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain] |
| Unity-Gain Bandwidth | — | [DATA_NEEDED: unity-gain bandwidth] |