LM2903AVQDRQ1 vs LM2903HYDT Comparison
Detailed side-by-side comparison of LM2903AVQDRQ1 by Texas Instruments and LM2903HYDT by STMicroelectronics. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
LM2903AVQDRQ1 - 36V AEC-Q100 Dual Open-Collector Comparator | Texas Instruments
LM2903AVQDRQ1 ✓ ActiveSTMicroelectronics
LM2903HYDT - Dual 36V Open-Collector Comparator | STMicroelectronics
LM2903HYDT ✓ ActiveSpecification Comparison
| Parameter | LM2903AVQDRQ1 | LM2903HYDT |
|---|---|---|
| Brand | Texas Instruments | STMicroelectronics |
| Category | Amplifier ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Comparator Type | Differential, general purpose | Low-power dual differential voltage comparator |
| Number of Channels | 2 | 2 channels |
| Output Type | Open-Collector / Open-Drain, Rail-to-Rail | Open-collector, rail-to-rail |
| Supply Voltage Range, Single | 2 V to 36 V | — |
| Supply Voltage Range, Dual | +/-1 V to +/-18 V | — |
| Input Common-Mode Range | Rail-to-Rail | — |
| Supply Current | 0.4 mA per channel (distributor specification listing) | — |
| Propagation Delay | 1.3 us | 1.3 µs |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Differential Input Voltage Range | [DATA_NEEDED: maximum differential input voltage] | Equal to maximum rated supply voltage |
| Operating Temperature Range | -40 C to +125 C | — |
| Automotive Qualification | AEC-Q100 Grade 0 and Grade 1 | AEC-Q100 qualified |
| ESD Qualification Test | MIL-STD-883, Method 3015 | — |
| Package | 8-SOIC (D), 0.154 in (3.90 mm) body width | 8-pin SOIC |
| Number of Pins | 8 | — |
| Mounting Type | Surface Mount | Surface mount |
| Supply Voltage Independent Supply Current | Yes, low supply-current drain independent of supply voltage | — |
| RoHS Status | [DATA_NEEDED: RoHS compliance statement] | [DATA_NEEDED: RoHS status] |
| Lead Finish | [DATA_NEEDED: lead finish / lead-free status] | — |
| Supply Voltage Range | — | 2 V to 36 V |
| Dual-Supply Operating Range | — | ±1 V to ±18 V |
| Typical Supply Current | — | 0.4 mA |
| Typical Power Consumption per Comparator | — | 1 mW at 5 V |
| Typical Input Bias Current | — | 25 nA |
| Typical Input Offset Current | — | ±5 nA |
| Input Common-Mode Voltage Range | — | Includes ground |
| Typical Low Saturation Voltage | — | 250 mV at 4 mA output current |
| Packaging | — | Tape and reel |
| REACH Status | — | [DATA_NEEDED: REACH status] |