LM2903AVQDRQ1 vs LM2903HYDT Perbandingan
Perbandingan bersamaan detil LM2903AVQDRQ1 dari Texas Instruments dan LM2903HYDT dari STMicroelectronics. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
LM2903AVQDRQ1 - 36V AEC-Q100 Dual Open-Collector Comparator | Texas Instruments
LM2903AVQDRQ1 ✓ AktifSTMicroelectronics
LM2903HYDT - Dual 36V Open-Collector Comparator | STMicroelectronics
LM2903HYDT ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | LM2903AVQDRQ1 | LM2903HYDT |
|---|---|---|
| Merek | Texas Instruments | STMicroelectronics |
| Kategori | Amplifier ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Comparator Type | Differential, general purpose | Low-power dual differential voltage comparator |
| Number of Channels | 2 | 2 channels |
| Tipe Output | Open-Collector / Open-Drain, Rail-to-Rail | Open-collector, rail-to-rail |
| Supply Voltage Range, Single | 2 V to 36 V | — |
| Supply Voltage Range, Dual | +/-1 V to +/-18 V | — |
| Input Common-Mode Range | Rail-to-Rail | — |
| Arus Pemuat | 0.4 mA per channel (distributor specification listing) | — |
| Propagation Delay | 1.3 us | 1.3 µs |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Differential Input Voltage Range | [DATA_NEEDED: maximum differential input voltage] | Equal to maximum rated supply voltage |
| Rentang Suhu Kerja | -40 C to +125 C | — |
| Automotive Qualification | AEC-Q100 Grade 0 and Grade 1 | AEC-Q100 qualified |
| ESD Qualification Test | MIL-STD-883, Method 3015 | — |
| Paket | 8-SOIC (D), 0.154 in (3.90 mm) body width | 8-pin SOIC |
| Jumlah Pin | 8 | — |
| Tipe Mounting | Surface Mount | Surface mount |
| Supply Voltage Independent Supply Current | Yes, low supply-current drain independent of supply voltage | — |
| Status RoHS | [DATA_NEEDED: RoHS compliance statement] | [DATA_NEEDED: RoHS status] |
| Lead Finish | [DATA_NEEDED: lead finish / lead-free status] | — |
| Supply Voltage Range | — | 2 V to 36 V |
| Dual-Supply Operating Range | — | ±1 V to ±18 V |
| Typical Supply Current | — | 0.4 mA |
| Typical Power Consumption per Comparator | — | 1 mW at 5 V |
| Typical Input Bias Current | — | 25 nA |
| Typical Input Offset Current | — | ±5 nA |
| Input Common-Mode Voltage Range | — | Includes ground |
| Typical Low Saturation Voltage | — | 250 mV at 4 mA output current |
| Packaging | — | Tape and reel |
| REACH Status | — | [DATA_NEEDED: REACH status] |