LM2903QDRG4Q1 vs LM2903QDG4 Comparison
Detailed side-by-side comparison of LM2903QDRG4Q1 by Texas Instruments and LM2903QDG4 by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
LM2903QDG4 - Dual Differential Comparator, 36 V | Texas Instruments
LM2903QDG4 ✓ ActiveSpecification Comparison
| Parameter | LM2903QDRG4Q1 | LM2903QDG4 |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Comparator Type | Dual differential comparator | Dual differential comparator |
| Number of Channels | 2 channels | — |
| Supply Voltage Range | 2 V to 36 V | 2 V to 36 V |
| Dual Supply Range | ±1 V to ±18 V | — |
| Output Type | Open-collector | Open-collector |
| Maximum Input Offset Voltage | 7 mV at 5 V | — |
| Maximum Input Bias Current | 0.25 µA | — |
| Typical Output Current | 20 mA | — |
| Maximum Quiescent Current | 2.5 mA | — |
| Automotive Qualification | AEC-Q100 Grade 0 and 1 | [DATA_NEEDED: automotive qualification status] |
| Operating Temperature Range | -40°C to +125°C | -40 °C to 125 °C |
| Package | 8-SOIC (D), 8 pins | 8-pin SOIC, 3.90 mm width |
| Package Width | 3.90 mm | — |
| Package Length | 0.154 inch | — |
| Mounting Type | Surface mount | Surface mount |
| Single-Supply Operation | 2 V to 36 V | Supported |
| Minimum Supply Difference in Dual Operation | 2 V | — |
| Minimum VCC Margin for Dual-Supply Operation | 1.5 V | — |
| ESD Qualification | 2 kV ESD performance | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Number of Comparator Channels | — | 2 channels |
| Dual-Supply Total Voltage Range | — | 2 V to 36 V |
| Logic Compatibility | — | TTL, CMOS, and MOS compatible |
| Differential Input Type | — | Differential |
| Dual-Supply Operation | — | Supported |
| Independent Comparators | — | 2 independent channels |
| Differential Input Voltage Range | — | ±36 V |
| Output Pull-Up Requirement | — | External pull-up resistor required |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Standard Tape-and-Reel Quantity | — | [DATA_NEEDED: standard tape-and-reel quantity] |