LM2903QDRG4Q1 vs LM2903QDG4 So sánh
So sánh chi tiết song song của LM2903QDRG4Q1 bằng Texas Instruments và LM2903QDG4 bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Texas Instruments
LM2903QDG4 - Dual Differential Comparator, 36 V | Texas Instruments
LM2903QDG4 ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | LM2903QDRG4Q1 | LM2903QDG4 |
|---|---|---|
| Thương hiệu | Texas Instruments | Texas Instruments |
| Danh mục | Amplifier ICs | Amplifier ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Comparator Type | Dual differential comparator | Dual differential comparator |
| Number of Channels | 2 channels | — |
| Supply Voltage Range | 2 V to 36 V | 2 V to 36 V |
| Dual Supply Range | ±1 V to ±18 V | — |
| Kiểu đầu ra | Open-collector | Open-collector |
| Maximum Input Offset Voltage | 7 mV at 5 V | — |
| Maximum Input Bias Current | 0.25 µA | — |
| Typical Output Current | 20 mA | — |
| Maximum Quiescent Current | 2.5 mA | — |
| Automotive Qualification | AEC-Q100 Grade 0 and 1 | [DATA_NEEDED: automotive qualification status] |
| Khoảng nhiệt độ hoạt động | -40°C to +125°C | -40 °C to 125 °C |
| Hộp | 8-SOIC (D), 8 pins | 8-pin SOIC, 3.90 mm width |
| Package Width | 3.90 mm | — |
| Package Length | 0.154 inch | — |
| Kiểu lắp đặt | Surface mount | Surface mount |
| Single-Supply Operation | 2 V to 36 V | Supported |
| Minimum Supply Difference in Dual Operation | 2 V | — |
| Minimum VCC Margin for Dual-Supply Operation | 1.5 V | — |
| ESD Qualification | 2 kV ESD performance | — |
| Trạng thái RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Number of Comparator Channels | — | 2 channels |
| Dual-Supply Total Voltage Range | — | 2 V to 36 V |
| Logic Compatibility | — | TTL, CMOS, and MOS compatible |
| Differential Input Type | — | Differential |
| Dual-Supply Operation | — | Supported |
| Independent Comparators | — | 2 independent channels |
| Differential Input Voltage Range | — | ±36 V |
| Output Pull-Up Requirement | — | External pull-up resistor required |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Standard Tape-and-Reel Quantity | — | [DATA_NEEDED: standard tape-and-reel quantity] |