LM2904AVQPWR vs LM2904AYPT Comparison
Detailed side-by-side comparison of LM2904AVQPWR by Texas Instruments and LM2904AYPT by STMicroelectronics. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
STMicroelectronics
LM2904AYPT - Dual Low-Power Op-Amp, 1.1MHz | STMicroelectronics
LM2904AYPT ✓ ActiveSpecification Comparison
| Parameter | LM2904AVQPWR | LM2904AYPT |
|---|---|---|
| Brand | Texas Instruments | STMicroelectronics |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Number of Amplifiers | 2 channels | 2 |
| Amplifier Type | Dual general-purpose operational amplifier | General-purpose, bipolar, single-ended |
| Maximum Total Supply Voltage | 30 V | — |
| Single-Supply Operating Range | Up to +13 V | — |
| Gain-Bandwidth Product | 700 kHz | — |
| Typical Supply Current per Amplifier | 0.7 mA | — |
| Operating Temperature Range | -40°C to +125°C | -40C to +125C |
| Package | 8-pin TSSOP (PW) | TSSOP-8 |
| Package Body Width | 4.40 mm | — |
| Mounting Type | Surface Mount | Surface Mount |
| Compensation | Internal frequency compensation | — |
| Common-Mode Input Range | Includes ground | 0 V to VCC - 1.5 V |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | 2 mV typical / 7 mV maximum (A grade) |
| Input Bias Current | [DATA_NEEDED: input bias current] | 20 nA (typical) |
| Slew Rate | [DATA_NEEDED: slew rate] | 0.6 V/us |
| Unity-Gain Bandwidth | [DATA_NEEDED: unity-gain bandwidth] | — |
| Output Current | [DATA_NEEDED: output current] | — |
| Short-Circuit Protection | [DATA_NEEDED: short-circuit protection] | — |
| Automotive Qualification | Automotive-grade variant available as LM2904AVQPWRQ1 | — |
| MSL Level | MSL 1 - 260°C unlimited floor life | — |
| RoHS Status | Compliant | Compliant |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| Gain Bandwidth Product | — | 1.1 MHz |
| Supply Voltage Range (Single Supply) | — | 3 V to 30 V |
| Supply Voltage Range (Dual Supply) | — | +/-1.5 V to +/-15 V |
| Supply Current per Amplifier | — | 0.7 mA (typical) |
| Output Current per Channel | — | 20 mA (typical) |
| Qualification | — | Automotive grade (AEC-Q100 qualified per ST automotive family designation) |