LM2904AVQPWR vs LM2904AYPT Karşılaştırma

Ayrıntılı yan yana karşılaştırma LM2904AVQPWR tarafından Texas Instruments ve LM2904AYPT tarafından STMicroelectronicsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.

Texas Instruments
LM2904AVQPWR LM2904AVQPWR - Dual 30V 700kHz Op Amp | Texas Instruments

LM2904AVQPWR - Dual 30V 700kHz Op Amp | Texas Instruments

LM2904AVQPWR ✓ Aktif
STMicroelectronics
LM2904AYPT LM2904AYPT - Dual Low-Power Op-Amp, 1.1MHz | STMicroelectronics

LM2904AYPT - Dual Low-Power Op-Amp, 1.1MHz | STMicroelectronics

LM2904AYPT ✓ Aktif

Özellik Karşılaştırması

Parametre LM2904AVQPWR LM2904AYPT
Marka Texas Instruments STMicroelectronics
Kategori Amplifier ICs Amplifier ICs
Yaşam Döngüsü Durumu Aktif Aktif
Number of Amplifiers 2 channels 2
Amplifier Type Dual general-purpose operational amplifier General-purpose, bipolar, single-ended
Maximum Total Supply Voltage 30 V —
Single-Supply Operating Range Up to +13 V —
Gain-Bandwidth Product 700 kHz —
Typical Supply Current per Amplifier 0.7 mA —
İşletim Sıcaklığı Aralığı -40°C to +125°C -40C to +125C
Paket 8-pin TSSOP (PW) TSSOP-8
Package Body Width 4.40 mm —
Montaj Türü Surface Mount Surface Mount
Compensation Internal frequency compensation —
Common-Mode Input Range Includes ground 0 V to VCC - 1.5 V
Input Offset Voltage [DATA_NEEDED: input offset voltage] 2 mV typical / 7 mV maximum (A grade)
Input Bias Current [DATA_NEEDED: input bias current] 20 nA (typical)
Slew Rate [DATA_NEEDED: slew rate] 0.6 V/us
Unity-Gain Bandwidth [DATA_NEEDED: unity-gain bandwidth] —
Output Current [DATA_NEEDED: output current] —
Short-Circuit Protection [DATA_NEEDED: short-circuit protection] —
Automotive Qualification Automotive-grade variant available as LM2904AVQPWRQ1 —
MSL Seviyesi MSL 1 - 260°C unlimited floor life —
RoHS Durumu Compliant Compliant
REACH Status [DATA_NEEDED: REACH compliance status] —
Gain Bandwidth Product — 1.1 MHz
Supply Voltage Range (Single Supply) — 3 V to 30 V
Supply Voltage Range (Dual Supply) — +/-1.5 V to +/-15 V
Supply Current per Amplifier — 0.7 mA (typical)
Output Current per Channel — 20 mA (typical)
Qualification — Automotive grade (AEC-Q100 qualified per ST automotive family designation)

Dökümanlar & Kaynaklar

Tüm Ürünleri Gözden Geçir BOM Oluştur Teklif İsteyin