LM2904PWR vs LM2901PWR Comparison
Detailed side-by-side comparison of LM2904PWR by Texas Instruments and LM2901PWR by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
LM2904PWR - Dual 700 kHz Op Amp, 26 V | Texas Instruments (Tape & Reel)
LM2904PWR ✓ ActiveTexas Instruments
LM2901PWR - Quad 30V Open-Collector Comparator | Texas Instruments
LM2901PWR ✓ ActiveSpecification Comparison
| Parameter | LM2904PWR | LM2901PWR |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Number of Amplifiers | 2 circuits | — |
| Product Type | Dual general-purpose operational amplifier | — |
| Maximum Supply Voltage | 26 V | — |
| Gain-Bandwidth Product | 700 kHz | — |
| Typical Supply Current | 0.7 mA | — |
| Supply-Current Independence | Independent of supply voltage | — |
| Supported Supply Configurations | Single supply or split supply | — |
| Common-Mode Input Range | Includes ground | Includes ground |
| Architecture | Voltage feedback, internally frequency compensated | — |
| Package | 8-TSSOP, 4.40 mm width | 14-pin TSSOP |
| Package Length | 4.40 mm | — |
| Mounting Type | Surface mount | Surface mount |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Comparator Type | — | General-purpose differential comparator |
| Number of Channels | — | 4 channels |
| Supply Voltage | — | 2 V to 36 V |
| Dual Supply Voltage | — | ±1 V to ±18 V |
| Maximum Rated Supply | — | 38 V |
| Output Type | — | Open-collector |
| Logic Compatibility | — | TTL, MOS, and CMOS |
| Low Input Offset Voltage | — | 0.37 mV |
| Low Input Bias Current | — | 3.5 nA |
| Supply Current | — | 200 µA per comparator |
| Response Time | — | 1 µs |
| Differential Input Voltage Range | — | ±38 V |
| ESD Rating | — | 2 kV HBM |
| Output Saturation Voltage | — | [DATA_NEEDED: output saturation voltage] |