LM2904PWR vs LM2901PWR 比較
詳細な並列比較: LM2904PWR メーカー: Texas Instruments および LM2901PWR メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Texas Instruments
LM2904PWR - Dual 700 kHz Op Amp, 26 V | Texas Instruments (Tape & Reel)
LM2904PWR ✓ 生産中Texas Instruments
LM2901PWR - Quad 30V Open-Collector Comparator | Texas Instruments
LM2901PWR ✓ 生産中仕様比較
| パラメータ | LM2904PWR | LM2901PWR |
|---|---|---|
| ブランド | Texas Instruments | Texas Instruments |
| カテゴリ | Amplifier ICs | Amplifier ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Number of Amplifiers | 2 circuits | — |
| Product Type | Dual general-purpose operational amplifier | — |
| Maximum Supply Voltage | 26 V | — |
| Gain-Bandwidth Product | 700 kHz | — |
| Typical Supply Current | 0.7 mA | — |
| Supply-Current Independence | Independent of supply voltage | — |
| Supported Supply Configurations | Single supply or split supply | — |
| Common-Mode Input Range | Includes ground | Includes ground |
| Architecture | Voltage feedback, internally frequency compensated | — |
| パッケージ | 8-TSSOP, 4.40 mm width | 14-pin TSSOP |
| Package Length | 4.40 mm | — |
| 実装タイプ | Surface mount | Surface mount |
| 動作温度範囲 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | — |
| RoHS ステータス | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Comparator Type | — | General-purpose differential comparator |
| Number of Channels | — | 4 channels |
| 電源電圧 | — | 2 V to 36 V |
| Dual Supply Voltage | — | ±1 V to ±18 V |
| Maximum Rated Supply | — | 38 V |
| 出力タイプ | — | Open-collector |
| Logic Compatibility | — | TTL, MOS, and CMOS |
| Low Input Offset Voltage | — | 0.37 mV |
| Low Input Bias Current | — | 3.5 nA |
| 電源電流 | — | 200 µA per comparator |
| Response Time | — | 1 µs |
| Differential Input Voltage Range | — | ±38 V |
| ESD Rating | — | 2 kV HBM |
| Output Saturation Voltage | — | [DATA_NEEDED: output saturation voltage] |