LM324DG4 vs LM324DR Comparison
Detailed side-by-side comparison of LM324DG4 by Texas Instruments and LM324DR by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | LM324DG4 | LM324DR |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Amplifier Type | General-purpose operational amplifier | Quad general-purpose operational amplifier |
| Number of Amplifier Circuits | 4 circuits | — |
| Unity-Gain Bandwidth | 1.2 MHz | — |
| Package | 14-SOIC | 14-pin SOIC |
| Package Width | 3.90 mm | — |
| Operating Temperature Range | 0 °C to 70 °C | [DATA_NEEDED: operating temperature range] |
| Typical Supply Current Drain | 0.8 mA per amplifier | — |
| Common-Mode Input Range | Includes ground | [DATA_NEEDED: common-mode input range] |
| Input Offset Voltage | [DATA_NEEDED: LM324DG4 input offset voltage] | Plus or minus 2 mV maximum for BA versions at 25 C |
| Supply Voltage Range | [DATA_NEEDED: LM324DG4 supply voltage range] | 3 V to 36 V for B versions |
| Output Current | [DATA_NEEDED: output current] | [DATA_NEEDED: output current] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Open-Loop Gain | [DATA_NEEDED: DC open-loop gain] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | [DATA_NEEDED: slew rate] |
| Input Noise Voltage | [DATA_NEEDED: input noise voltage] | — |
| Input Noise Current | [DATA_NEEDED: input noise current] | — |
| Shutdown Control | [DATA_NEEDED: shutdown control] | — |
| Mounting Style | Surface mount | — |
| RoHS Status | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | not_applicable | — |
| Number of Amplifiers | — | 4 |
| Architecture | — | Four independent high-gain frequency-compensated operational amplifiers |
| ESD Protection | — | 2 kV HBM for B, BA, and K versions |
| Input Filtering | — | Internal RF and EMI filter for B and BA versions |
| Supply Configuration | — | Single supply or split supply |
| Frequency Compensation | — | Internal |
| Mounting Type | — | Surface mount |
| Device Type | — | Low-power operational amplifier |
| Input Type | — | Differential input |
| Output Type | — | Single-ended output |
| Operating Class | — | Standard general purpose |
| AEC-Q100 Status | — | [DATA_NEEDED: AEC-Q100 qualification status] |
| Gain Bandwidth Product | — | [DATA_NEEDED: gain bandwidth product] |
| Output Swing | — | [DATA_NEEDED: output swing] |