LM324DG4 vs LM324DR So sánh

So sánh chi tiết song song của LM324DG4 bằng Texas Instruments và LM324DR bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Texas Instruments
LM324DG4 LM324DG4 - Quad 1.2MHz Op Amp | Texas Instruments

LM324DG4 - Quad 1.2MHz Op Amp | Texas Instruments

LM324DG4 ✓ Hoạt động
Texas Instruments
LM324DR LM324DR - Quad 36V Op Amp | Texas Instruments | SOIC-14

LM324DR - Quad 36V Op Amp | Texas Instruments | SOIC-14

LM324DR ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số LM324DG4 LM324DR
Thương hiệu Texas Instruments Texas Instruments
Danh mục Amplifier ICs Amplifier ICs
Trạng thái vòng đời Hoạt động Hoạt động
Amplifier Type General-purpose operational amplifier Quad general-purpose operational amplifier
Number of Amplifier Circuits 4 circuits —
Unity-Gain Bandwidth 1.2 MHz —
Hộp 14-SOIC 14-pin SOIC
Package Width 3.90 mm —
Khoảng nhiệt độ hoạt động 0 °C to 70 °C [DATA_NEEDED: operating temperature range]
Typical Supply Current Drain 0.8 mA per amplifier —
Common-Mode Input Range Includes ground [DATA_NEEDED: common-mode input range]
Input Offset Voltage [DATA_NEEDED: LM324DG4 input offset voltage] Plus or minus 2 mV maximum for BA versions at 25 C
Supply Voltage Range [DATA_NEEDED: LM324DG4 supply voltage range] 3 V to 36 V for B versions
Output Current [DATA_NEEDED: output current] [DATA_NEEDED: output current]
Input Bias Current [DATA_NEEDED: input bias current] [DATA_NEEDED: input bias current]
Open-Loop Gain [DATA_NEEDED: DC open-loop gain] —
Slew Rate [DATA_NEEDED: slew rate] [DATA_NEEDED: slew rate]
Input Noise Voltage [DATA_NEEDED: input noise voltage] —
Input Noise Current [DATA_NEEDED: input noise current] —
Shutdown Control [DATA_NEEDED: shutdown control] —
Kiểu lắp đặt Surface mount —
Trạng thái RoHS unknown [DATA_NEEDED: RoHS status]
REACH Status unknown [DATA_NEEDED: REACH status]
AEC-Q100 Qualification not_applicable —
Number of Amplifiers — 4
Architecture — Four independent high-gain frequency-compensated operational amplifiers
ESD Protection — 2 kV HBM for B, BA, and K versions
Input Filtering — Internal RF and EMI filter for B and BA versions
Supply Configuration — Single supply or split supply
Frequency Compensation — Internal
Kiểu lắp đặt — Surface mount
Device Type — Low-power operational amplifier
Input Type — Differential input
Kiểu đầu ra — Single-ended output
Operating Class — Standard general purpose
AEC-Q100 Status — [DATA_NEEDED: AEC-Q100 qualification status]
Gain Bandwidth Product — [DATA_NEEDED: gain bandwidth product]
Output Swing — [DATA_NEEDED: output swing]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá