LM339APWG4 vs LM339APWRG4 Comparison
Detailed side-by-side comparison of LM339APWG4 by Texas Instruments and LM339APWRG4 by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
LM339APWG4 - 4-Channel 30V Comparator | Texas Instruments
LM339APWG4 ⚠ Last Time BuyTexas Instruments
LM339APWRG4 - Quad Open-Collector Comparator | Texas Instruments
LM339APWRG4 ✓ ActiveSpecification Comparison
| Parameter | LM339APWG4 | LM339APWRG4 |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Interface ICs | Amplifier ICs |
| Lifecycle Status | Last Time Buy | Active |
| Comparator Type | Quad differential comparator | Quad differential comparator |
| Number of Channels | 4 channels | 4 channels |
| Output Type | Open-collector | Open collector |
| Single-Supply Operating Range | 2 V to 30 V | — |
| Dual-Supply Operating Range | ±1 V to ±15 V | — |
| Maximum Voltage Rating | Up to 38 V | — |
| Differential Input Voltage Range | ±38 V | — |
| Common-Mode Input Range | Includes ground | — |
| Low Input Offset Voltage | 0.37 mV | — |
| Low Input Bias Current | 3.5 nA | — |
| Supply Current | 200 µA per comparator | — |
| ESD Rating | 2 kV HBM | — |
| Logic Compatibility | TTL, MOS, and CMOS | Compatible with TTL, MOS, and CMOS |
| Package | 14-pin TSSOP (PW), 4.40 mm width | 14-pin TSSOP |
| Mounting Type | Surface mount | Surface mount |
| Operating Temperature Range | 0 °C to 70 °C | — |
| Lifecycle Status | Last Time Buy | — |
| RoHS Status | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Supply Voltage Range | — | 2 V to 36 V |
| Maximum Supply Voltage | — | 36 V |
| Supply Current Drain | — | 0.8 mA typical |
| Input Bias Current | — | Low input bias current |
| Differential Input Voltage | — | Equal to maximum-rated supply voltage |
| Common-Mode Input Voltage | — | Includes ground |
| Operating Configuration | — | Single supply or split supply |
| Comparator Response Time | — | 300 ns |
| Output Pull-Up Requirement | — | External pull-up resistor required |
| RoHS Compliance | — | Compliant |