LM339APWG4 vs LM339APWRG4 Comparaison
Comparaison détaillée côte à côte de LM339APWG4 par Texas Instruments et LM339APWRG4 par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
LM339APWG4 - 4-Channel 30V Comparator | Texas Instruments
LM339APWG4 ⚠ Dernier achatTexas Instruments
LM339APWRG4 - Quad Open-Collector Comparator | Texas Instruments
LM339APWRG4 ✓ ActifComparaison des spécifications
| Paramètre | LM339APWG4 | LM339APWRG4 |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Interface ICs | Amplifier ICs |
| Statut du cycle de vie | Dernier achat | Actif |
| Comparator Type | Quad differential comparator | Quad differential comparator |
| Number of Channels | 4 channels | 4 channels |
| Type de sortie | Open-collector | Open collector |
| Single-Supply Operating Range | 2 V to 30 V | — |
| Dual-Supply Operating Range | ±1 V to ±15 V | — |
| Maximum Voltage Rating | Up to 38 V | — |
| Differential Input Voltage Range | ±38 V | — |
| Common-Mode Input Range | Includes ground | — |
| Low Input Offset Voltage | 0.37 mV | — |
| Low Input Bias Current | 3.5 nA | — |
| Courant d'alimentation | 200 µA per comparator | — |
| ESD Rating | 2 kV HBM | — |
| Logic Compatibility | TTL, MOS, and CMOS | Compatible with TTL, MOS, and CMOS |
| Boîtier | 14-pin TSSOP (PW), 4.40 mm width | 14-pin TSSOP |
| Type de montage | Surface mount | Surface mount |
| Plage de température de fonctionnement | 0 °C to 70 °C | — |
| Statut du cycle de vie | Last Time Buy | — |
| Statut RoHS | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Supply Voltage Range | — | 2 V to 36 V |
| Maximum Supply Voltage | — | 36 V |
| Supply Current Drain | — | 0.8 mA typical |
| Input Bias Current | — | Low input bias current |
| Differential Input Voltage | — | Equal to maximum-rated supply voltage |
| Common-Mode Input Voltage | — | Includes ground |
| Operating Configuration | — | Single supply or split supply |
| Comparator Response Time | — | 300 ns |
| Output Pull-Up Requirement | — | External pull-up resistor required |
| RoHS Compliance | — | Compliant |