LM339NE3 vs LM2901N Comparison
Detailed side-by-side comparison of LM339NE3 by Texas Instruments and LM2901N by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
LM339NE3 - 36V Quad Open-Collector Comparator | Texas Instruments
LM339NE3 ✓ ActiveSpecification Comparison
| Parameter | LM339NE3 | LM2901N |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Comparator Type | Differential, general-purpose | Quad differential comparator |
| Number of Elements | 4 comparators | — |
| Single-Supply Voltage Range | 2 V to 36 V | — |
| Dual-Supply Voltage Range | ±1 V to ±18 V | — |
| Output Type | Open-collector | Open collector |
| Low Input Offset Voltage | 0.37 mV | — |
| Low Input Bias Current | 3.5 nA | — |
| Supply Current | 200 µA per comparator | — |
| Response Time | 1 µs | [DATA_NEEDED: comparator response time] |
| ESD Rating | 2 kV HBM | — |
| Maximum Rated Supply Voltage | 38 V | — |
| Common-Mode Input Range | Includes ground | — |
| Differential Input Voltage Range | ±38 V | — |
| Logic Compatibility | TTL, MOS, and CMOS | TTL, DTL, MOS, ECL, and CMOS output compatibility |
| Package | 14-PDIP, 0.300 inch pitch, 7.62 mm | 14-pin DIP |
| Mounting Type | Through-hole | Through hole |
| Packaging | Tube | — |
| Operating Temperature | [DATA_NEEDED: operating temperature range] | -40 °C to +85 °C |
| RoHS Status | [DATA_NEEDED: RoHS status] | unknown |
| Number of Channels | — | 4 channels |
| Supply Configuration | — | Single or split supply |
| Maximum Supply Voltage | — | 36 V |
| Input Bias Current | — | 25 nA typical |
| Input Offset Current | — | ±5.0 nA typical |
| Supply Current Drain | — | 800 µA typical |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Output Saturation Voltage | — | [DATA_NEEDED: output saturation voltage] |
| Output Sink Current | — | [DATA_NEEDED: output sink current] |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | not_applicable |