LM339NE3 vs LM2901N השוואה
השוואה מפורטת זה לצד זה של LM339NE3 מאת Texas Instruments ו LM2901N מאת Texas Instruments. השווה מפרטים עיקריים, פרמטרים חשמליים, אריזה, סטטוס מחזור חיים, תמחור וזמינות כדי לקבוע את הרכיב הטוב ביותר לדרישות העיצוב שלך.
השוואת מפרטים
| פרמטר | LM339NE3 | LM2901N |
|---|---|---|
| מותג | Texas Instruments | Texas Instruments |
| קטגוריה | Amplifier ICs | Amplifier ICs |
| סטטוס מחזור חיים | פעיל | פעיל |
| Comparator Type | Differential, general-purpose | Quad differential comparator |
| Number of Elements | 4 comparators | — |
| Single-Supply Voltage Range | 2 V to 36 V | — |
| Dual-Supply Voltage Range | ±1 V to ±18 V | — |
| סוג פלט | Open-collector | Open collector |
| Low Input Offset Voltage | 0.37 mV | — |
| Low Input Bias Current | 3.5 nA | — |
| זרם אספקה | 200 µA per comparator | — |
| Response Time | 1 µs | [DATA_NEEDED: comparator response time] |
| ESD Rating | 2 kV HBM | — |
| Maximum Rated Supply Voltage | 38 V | — |
| Common-Mode Input Range | Includes ground | — |
| Differential Input Voltage Range | ±38 V | — |
| Logic Compatibility | TTL, MOS, and CMOS | TTL, DTL, MOS, ECL, and CMOS output compatibility |
| מארז | 14-PDIP, 0.300 inch pitch, 7.62 mm | 14-pin DIP |
| סוג הרכבה | Through-hole | Through hole |
| Packaging | Tube | — |
| טמפרטורת פעולה | [DATA_NEEDED: operating temperature range] | -40 °C to +85 °C |
| סטטוס RoHS | [DATA_NEEDED: RoHS status] | unknown |
| Number of Channels | — | 4 channels |
| Supply Configuration | — | Single or split supply |
| Maximum Supply Voltage | — | 36 V |
| Input Bias Current | — | 25 nA typical |
| Input Offset Current | — | ±5.0 nA typical |
| Supply Current Drain | — | 800 µA typical |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Output Saturation Voltage | — | [DATA_NEEDED: output saturation voltage] |
| Output Sink Current | — | [DATA_NEEDED: output sink current] |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | not_applicable |