LM339PWG4 vs LM339DTBR2G Comparison
Detailed side-by-side comparison of LM339PWG4 by Texas Instruments and LM339DTBR2G by onsemi. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | LM339PWG4 | LM339DTBR2G |
|---|---|---|
| Brand | Texas Instruments | onsemi |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Comparator Channel Count | 4 channels | — |
| Comparator Type | 4 differential comparators | Quad differential comparator |
| Output Type | Open collector | Open collector |
| Supply Configuration | Single or dual supply | Single supply |
| Maximum Supply Voltage Rating | 38 V | — |
| Operating Supply Voltage | 2 V to 36 V | — |
| Typical Supply-Current Drain | 0.8 mA | — |
| Typical Supply Current per Comparator | 200 uA | — |
| Low Input Offset Voltage | 0.37 mV | — |
| Low Input Bias Current | 3.5 nA | — |
| Input Common-Mode Range | Includes ground | [DATA_NEEDED: input common-mode voltage range] |
| Differential Input Voltage Range | Equal to maximum-rated supply voltage | [DATA_NEEDED: differential input voltage range] |
| Output Compatibility | TTL, MOS, and CMOS compatible | — |
| Operating Temperature Range | 0 C to 70 C | — |
| ESD Rating HBM | 2 kV | — |
| Package | 14-pin TSSOP | 14-pin TSSOP |
| Mounting Type | Surface mount | Surface mount |
| Output Saturation Voltage | [DATA_NEEDED: output saturation voltage] | — |
| Response Time | [DATA_NEEDED: response time] | [DATA_NEEDED: comparator response time] |
| Number of Channels | — | 4 channels |
| Supply Voltage Range | — | 3 V to 36 V |
| Logic Compatibility | — | CMOS and TTL compatible |
| Operating Temperature Grade | — | Commercial temperature grade |
| Output Sink Current | — | [DATA_NEEDED: output sink current] |
| Output Pull-Up Requirement | — | [DATA_NEEDED: external pull-up resistor requirements] |
| Supply Current | — | [DATA_NEEDED: quiescent supply current] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| RoHS Status | — | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |