LM339PWG4 vs LM339DTBR2G Comparación
Comparación detallada lado a lado de LM339PWG4 por Texas Instruments y LM339DTBR2G por onsemi. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | LM339PWG4 | LM339DTBR2G |
|---|---|---|
| Marca | Texas Instruments | onsemi |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Comparator Channel Count | 4 channels | — |
| Comparator Type | 4 differential comparators | Quad differential comparator |
| Tipo de salida | Open collector | Open collector |
| Supply Configuration | Single or dual supply | Single supply |
| Maximum Supply Voltage Rating | 38 V | — |
| Tensión de alimentación de funcionamiento | 2 V to 36 V | — |
| Typical Supply-Current Drain | 0.8 mA | — |
| Typical Supply Current per Comparator | 200 uA | — |
| Low Input Offset Voltage | 0.37 mV | — |
| Low Input Bias Current | 3.5 nA | — |
| Input Common-Mode Range | Includes ground | [DATA_NEEDED: input common-mode voltage range] |
| Differential Input Voltage Range | Equal to maximum-rated supply voltage | [DATA_NEEDED: differential input voltage range] |
| Output Compatibility | TTL, MOS, and CMOS compatible | — |
| Rango de temperatura de funcionamiento | 0 C to 70 C | — |
| ESD Rating HBM | 2 kV | — |
| Encapsulado | 14-pin TSSOP | 14-pin TSSOP |
| Tipo de montaje | Surface mount | Surface mount |
| Output Saturation Voltage | [DATA_NEEDED: output saturation voltage] | — |
| Response Time | [DATA_NEEDED: response time] | [DATA_NEEDED: comparator response time] |
| Number of Channels | — | 4 channels |
| Supply Voltage Range | — | 3 V to 36 V |
| Logic Compatibility | — | CMOS and TTL compatible |
| Operating Temperature Grade | — | Commercial temperature grade |
| Output Sink Current | — | [DATA_NEEDED: output sink current] |
| Output Pull-Up Requirement | — | [DATA_NEEDED: external pull-up resistor requirements] |
| Corriente de alimentación | — | [DATA_NEEDED: quiescent supply current] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Estado RoHS | — | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |