LM393DG4 vs LM393BIDR Comparison
Detailed side-by-side comparison of LM393DG4 by Texas Instruments and LM393BIDR by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | LM393DG4 | LM393BIDR |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Interface ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Comparator Type | Dual differential comparator | Dual differential general-purpose comparator |
| Number of Channels | 2 | 2 channels |
| Output Type | Open-collector | Open-collector |
| Supply Voltage Range | 2 V to 36 V | [DATA_NEEDED: operating supply voltage range] |
| Tested Maximum Operating Voltage | 30 V for non-V devices | — |
| V-Suffix Tested Maximum Operating Voltage | 32 V | — |
| Propagation Delay | Approximately 0.3 us | — |
| Supply Current Drain | 0.4 mA typical per comparator | — |
| Supply Configuration | Single supply or dual supplies | — |
| Input Configuration | Differential inputs, two channels | — |
| Output Configuration | Open-collector with external pull-up | — |
| Package | 8-pin SOIC | 8-pin SOIC (D) |
| Package Type | SOIC-8 | — |
| Mounting Type | Surface mount | Surface mount |
| Commercial Grade | Commercial-grade applications | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | 3.5 nA |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Output Sink Current | [DATA_NEEDED: output sink current] | — |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | -40°C to +85°C |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| Maximum Rated Supply Voltage | — | 38 V |
| Differential Input Voltage Range | — | -38 V to +38 V |
| Common-Mode Input Range | — | Includes ground |
| Maximum Input Offset Voltage | — | 2.5 mV |
| Typical Low Input Offset Voltage | — | 0.37 mV |
| Supply Current | — | 200 µA per comparator |
| Response Time | — | 1 µs |
| ESD Rating (HBM) | — | 2 kV |
| Output Compatibility | — | TTL, MOS, and CMOS |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |