LM393DG4 vs LM393BIDR Comparaison
Comparaison détaillée côte à côte de LM393DG4 par Texas Instruments et LM393BIDR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | LM393DG4 | LM393BIDR |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Interface ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Comparator Type | Dual differential comparator | Dual differential general-purpose comparator |
| Number of Channels | 2 | 2 channels |
| Type de sortie | Open-collector | Open-collector |
| Supply Voltage Range | 2 V to 36 V | [DATA_NEEDED: operating supply voltage range] |
| Tested Maximum Operating Voltage | 30 V for non-V devices | — |
| V-Suffix Tested Maximum Operating Voltage | 32 V | — |
| Propagation Delay | Approximately 0.3 us | — |
| Supply Current Drain | 0.4 mA typical per comparator | — |
| Supply Configuration | Single supply or dual supplies | — |
| Input Configuration | Differential inputs, two channels | — |
| Configuration de sortie | Open-collector with external pull-up | — |
| Boîtier | 8-pin SOIC | 8-pin SOIC (D) |
| Package Type | SOIC-8 | — |
| Type de montage | Surface mount | Surface mount |
| Commercial Grade | Commercial-grade applications | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | 3.5 nA |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Output Sink Current | [DATA_NEEDED: output sink current] | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | -40°C to +85°C |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| Maximum Rated Supply Voltage | — | 38 V |
| Differential Input Voltage Range | — | -38 V to +38 V |
| Common-Mode Input Range | — | Includes ground |
| Maximum Input Offset Voltage | — | 2.5 mV |
| Typical Low Input Offset Voltage | — | 0.37 mV |
| Courant d'alimentation | — | 200 µA per comparator |
| Response Time | — | 1 µs |
| ESD Rating (HBM) | — | 2 kV |
| Output Compatibility | — | TTL, MOS, and CMOS |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |