LT1037CP vs LT1037CL Comparison
Detailed side-by-side comparison of LT1037CP by Texas Instruments and LT1037CL by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | LT1037CP | LT1037CL |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Unknown |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $0.00 | $0.00 |
| Product Type | Low-noise, high-speed, precision operational amplifier | Single operational amplifier |
| Number of Amplifiers | 1 amplifier | — |
| Gain-Bandwidth Product | 60 MHz | 60 MHz |
| Slew Rate | 11 V/µs minimum for LT1037 and LT1037A | — |
| Input Noise Density | 2.5 nV/√Hz wideband | — |
| Maximum Equivalent Input Noise Voltage | 3.8 nV/√Hz at 1 kHz | — |
| Low-Frequency Noise | 60 nV peak-to-peak from 0.1 Hz to 10 Hz | — |
| 1/f Corner Frequency | 2 Hz | 2 Hz |
| Input Offset Voltage | 10 µV | — |
| Input Offset Voltage Drift | 0.2 µV/°C | — |
| Common-Mode Rejection | 130 dB | 130 dB |
| Power-Supply Rejection | 130 dB | 130 dB |
| Typical Differential Voltage Gain | 20 V/µV at 25°C, 2 kΩ load, ±12 V | — |
| Differential Gain at 600 Ω Load | 12 V/µV at 25°C, ±10 V | — |
| Stable Closed-Loop Gain | 5 V/V or greater | — |
| Package | 8-pin PDIP | TO-99-8 |
| Mounting Type | Through-hole | Through-hole |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Amplifier Category | — | Instrumentation, op amp, buffer amp |
| Number of Circuits | — | 1 circuit |
| Wideband Input Noise | — | 2.5 nV/√Hz |
| 0.1 Hz to 10 Hz Peak-to-Peak Noise | — | 60 nV |
| Offset Voltage | — | 10 µV |
| Offset Voltage Drift | — | 0.2 µV/°C |
| Closed-Loop Stability | — | Stable for closed-loop gains of 5 or greater |
| Frequency Response | — | Up to 8 MHz |
| Input Offset Voltage Maximum | — | 110 µV |