LT1037CP vs LT1037CL Vergleich
Detaillierter Direktvergleich von LT1037CP von Texas Instruments und LT1037CL von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | LT1037CP | LT1037CL |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Unknown |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,00 | $0,00 |
| Product Type | Low-noise, high-speed, precision operational amplifier | Single operational amplifier |
| Number of Amplifiers | 1 amplifier | — |
| Gain-Bandwidth Product | 60 MHz | 60 MHz |
| Slew Rate | 11 V/µs minimum for LT1037 and LT1037A | — |
| Input Noise Density | 2.5 nV/√Hz wideband | — |
| Maximum Equivalent Input Noise Voltage | 3.8 nV/√Hz at 1 kHz | — |
| Low-Frequency Noise | 60 nV peak-to-peak from 0.1 Hz to 10 Hz | — |
| 1/f Corner Frequency | 2 Hz | 2 Hz |
| Input Offset Voltage | 10 µV | — |
| Input Offset Voltage Drift | 0.2 µV/°C | — |
| Common-Mode Rejection | 130 dB | 130 dB |
| Power-Supply Rejection | 130 dB | 130 dB |
| Typical Differential Voltage Gain | 20 V/µV at 25°C, 2 kΩ load, ±12 V | — |
| Differential Gain at 600 Ω Load | 12 V/µV at 25°C, ±10 V | — |
| Stable Closed-Loop Gain | 5 V/V or greater | — |
| Gehäuse | 8-pin PDIP | TO-99-8 |
| Montageart | Through-hole | Through-hole |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Amplifier Category | — | Instrumentation, op amp, buffer amp |
| Number of Circuits | — | 1 circuit |
| Wideband Input Noise | — | 2.5 nV/√Hz |
| 0.1 Hz to 10 Hz Peak-to-Peak Noise | — | 60 nV |
| Offset Voltage | — | 10 µV |
| Offset Voltage Drift | — | 0.2 µV/°C |
| Closed-Loop Stability | — | Stable for closed-loop gains of 5 or greater |
| Frequency Response | — | Up to 8 MHz |
| Input Offset Voltage Maximum | — | 110 µV |