MAX202CDR vs MAX232EIDR Comparison
Detailed side-by-side comparison of MAX202CDR by Texas Instruments and MAX232EIDR by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
MAX202CDR - 5V Dual RS-232 Transceiver | Texas Instruments (Tape & Reel)
MAX202CDR ✓ ActiveTexas Instruments
MAX232EIDR - 120kbps RS-232 Transceiver | Texas Instruments (Tape & Reel)
MAX232EIDR ✓ ActiveSpecification Comparison
| Parameter | MAX202CDR | MAX232EIDR |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Product Type | Dual RS-232 line driver and receiver | Dual RS-232 line driver and receiver |
| Supply Voltage Range | 4.5 V to 5.5 V | — |
| Number of Drivers | 2 | — |
| Number of Receivers | 2 | — |
| ESD Protection | ±15 kV pin-to-pin on serial-port connection pins, including ground | — |
| RS-232 Standard | TIA/EIA-232-F | — |
| Interface Function | Electrical interface between asynchronous communication controller and serial-port connector | — |
| Package | 16-pin SOIC | 16-pin SOIC |
| Mounting Type | Surface mount | Surface mount |
| Charge-Pump Circuit | Dual charge-pump circuit | — |
| Channel Configuration | 2 drivers and 2 receivers | — |
| Operating Temperature | [DATA_NEEDED: operating temperature range] | — |
| Quiescent Current | [DATA_NEEDED: quiescent current] | — |
| Data Rate | [DATA_NEEDED: maximum data rate] | — |
| Driver Output Voltage | [DATA_NEEDED: RS-232 driver output voltage] | — |
| Receiver Input Threshold | [DATA_NEEDED: receiver input threshold] | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Number of Driver Channels | — | 2 |
| Number of Receiver Channels | — | 2 |
| Supply Voltage | — | 5 V |
| Maximum Data Rate | — | 120 kbit/s |
| RS-232 Output Voltage | — | ±9 V |
| Receiver Input Voltage | — | ±30 V |
| Charge-Pump Capacitor Value | — | 1.0 µF |
| Number of Charge-Pump Capacitors | — | 4 |
| Human-Body-Model ESD Protection | — | 15 kV |
| IEC61000-4-2 Air-Gap ESD Protection | — | 15 kV |
| IEC61000-4-2 Contact Discharge Protection | — | 8 kV |
| Logic Compatibility | — | 5 V TTL/CMOS |
| Interface Compliance | — | TIA/EIA-232-F and ITU V.28 |
| Operating Supply Current | — | [DATA_NEEDED: operating supply current] |
| Operating Temperature Range | — | [DATA_NEEDED: operating temperature range] |