MAX202CDR vs MAX232EIDR So sánh

So sánh chi tiết song song của MAX202CDR bằng Texas Instruments và MAX232EIDR bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Texas Instruments
MAX202CDR MAX202CDR - 5V Dual RS-232 Transceiver | Texas Instruments (Tape & Reel)

MAX202CDR - 5V Dual RS-232 Transceiver | Texas Instruments (Tape & Reel)

MAX202CDR ✓ Hoạt động
Texas Instruments
MAX232EIDR MAX232EIDR - 120kbps RS-232 Transceiver | Texas Instruments (Tape & Reel)

MAX232EIDR - 120kbps RS-232 Transceiver | Texas Instruments (Tape & Reel)

MAX232EIDR ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số MAX202CDR MAX232EIDR
Thương hiệu Texas Instruments Texas Instruments
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Product Type Dual RS-232 line driver and receiver Dual RS-232 line driver and receiver
Supply Voltage Range 4.5 V to 5.5 V —
Number of Drivers 2 —
Number of Receivers 2 —
ESD Protection ±15 kV pin-to-pin on serial-port connection pins, including ground —
RS-232 Standard TIA/EIA-232-F —
Interface Function Electrical interface between asynchronous communication controller and serial-port connector —
Hộp 16-pin SOIC 16-pin SOIC
Kiểu lắp đặt Surface mount Surface mount
Charge-Pump Circuit Dual charge-pump circuit —
Channel Configuration 2 drivers and 2 receivers —
Nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] —
Điện áp yên tĩnh [DATA_NEEDED: quiescent current] —
Tốc độ dữ liệu [DATA_NEEDED: maximum data rate] —
Driver Output Voltage [DATA_NEEDED: RS-232 driver output voltage] —
Receiver Input Threshold [DATA_NEEDED: receiver input threshold] —
Trạng thái RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Number of Driver Channels — 2
Number of Receiver Channels — 2
Điện áp cung cấp — 5 V
Maximum Data Rate — 120 kbit/s
RS-232 Output Voltage — ±9 V
Receiver Input Voltage — ±30 V
Charge-Pump Capacitor Value — 1.0 µF
Number of Charge-Pump Capacitors — 4
Human-Body-Model ESD Protection — 15 kV
IEC61000-4-2 Air-Gap ESD Protection — 15 kV
IEC61000-4-2 Contact Discharge Protection — 8 kV
Logic Compatibility — 5 V TTL/CMOS
Interface Compliance — TIA/EIA-232-F and ITU V.28
Operating Supply Current — [DATA_NEEDED: operating supply current]
Khoảng nhiệt độ hoạt động — [DATA_NEEDED: operating temperature range]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá