MAX232INE4 vs MAX232NE4 Comparison
Detailed side-by-side comparison of MAX232INE4 by Texas Instruments and MAX232NE4 by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
MAX232INE4 - Dual RS-232 Driver/Receiver 120 kbps | Texas Instruments
MAX232INE4 ✓ ActiveTexas Instruments
MAX232NE4 - Dual 120kbps RS-232 Transceiver | Texas Instruments
MAX232NE4 ✓ ActiveSpecification Comparison
| Parameter | MAX232INE4 | MAX232NE4 |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Product Type | Dual RS-232 driver/receiver interface IC | — |
| Driver Channels | 2 drivers | — |
| Receiver Channels | 2 receivers | — |
| Maximum Data Rate | 120 kbps | — |
| Supply Voltage Range | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
| Nominal Supply Voltage | 5 V | — |
| Receiver Output Level | 5 V TTL/CMOS | — |
| Receiver Typical Threshold | 1.3 V | — |
| Receiver Typical Hysteresis | 0.5 V | — |
| Maximum Receiver Input Voltage | ±30 V | — |
| Charge-Pump Voltage Generator | On-chip capacitive voltage generator | — |
| Interface Standard | TIA/EIA-232-F | — |
| Package | 16-pin PDIP | 16-pin PDIP |
| Mounting Type | Through-hole | Through-hole |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Device Type | — | Dual EIA-232 driver/receiver transceiver |
| Number of Drivers | — | 2 |
| Number of Receivers | — | 2 |
| Data Rate | — | 120 kbit/s |
| Supply Configuration | — | Single 5 V supply |
| Charge-Pump Capacitor Value | — | 1.0 uF |
| Input Voltage Level | — | ±30 V maximum |
| Driver Supply Current | — | 8 mA typical |
| ESD Protection | — | 8 mA typical; ±2 kV human-body-model ESD for the MAX232 family |
| Driver Output Level | — | ±9 V typical |
| Protocol | — | RS-232 / EIA-232 |
| Duplex Mode | — | Full duplex |
| Package Dimensions | — | 0.300 in (7.62 mm) DIP width |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |