MAX232INE4 vs MAX232NE4 Comparación
Comparación detallada lado a lado de MAX232INE4 por Texas Instruments y MAX232NE4 por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
MAX232INE4 - Dual RS-232 Driver/Receiver 120 kbps | Texas Instruments
MAX232INE4 ✓ ActivoTexas Instruments
MAX232NE4 - Dual 120kbps RS-232 Transceiver | Texas Instruments
MAX232NE4 ✓ ActivoComparación de especificaciones
| Parámetro | MAX232INE4 | MAX232NE4 |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Product Type | Dual RS-232 driver/receiver interface IC | — |
| Driver Channels | 2 drivers | — |
| Receiver Channels | 2 receivers | — |
| Maximum Data Rate | 120 kbps | — |
| Supply Voltage Range | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
| Nominal Supply Voltage | 5 V | — |
| Receiver Output Level | 5 V TTL/CMOS | — |
| Receiver Typical Threshold | 1.3 V | — |
| Receiver Typical Hysteresis | 0.5 V | — |
| Maximum Receiver Input Voltage | ±30 V | — |
| Charge-Pump Voltage Generator | On-chip capacitive voltage generator | — |
| Interface Standard | TIA/EIA-232-F | — |
| Encapsulado | 16-pin PDIP | 16-pin PDIP |
| Tipo de montaje | Through-hole | Through-hole |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Estado RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Device Type | — | Dual EIA-232 driver/receiver transceiver |
| Number of Drivers | — | 2 |
| Number of Receivers | — | 2 |
| Velocidad de datos | — | 120 kbit/s |
| Supply Configuration | — | Single 5 V supply |
| Charge-Pump Capacitor Value | — | 1.0 uF |
| Input Voltage Level | — | ±30 V maximum |
| Driver Supply Current | — | 8 mA typical |
| ESD Protection | — | 8 mA typical; ±2 kV human-body-model ESD for the MAX232 family |
| Driver Output Level | — | ±9 V typical |
| Protocol | — | RS-232 / EIA-232 |
| Duplex Mode | — | Full duplex |
| Package Dimensions | — | 0.300 in (7.62 mm) DIP width |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |