MAX3232EIDB vs MAX3232ECDB Comparison
Detailed side-by-side comparison of MAX3232EIDB by Texas Instruments and MAX3232ECDB by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
MAX3232EIDB - 250kbps Dual RS-232 Transceiver | Texas Instruments
MAX3232EIDB ✓ ActiveSpecification Comparison
| Parameter | MAX3232EIDB | MAX3232ECDB |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Device Type | Dual RS-232 line driver and receiver | — |
| Number of Driver Channels | 2 channels | — |
| Number of Receiver Channels | 2 channels | — |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbit/s | — |
| Driver Output Slew Rate | 30 V/µs maximum | — |
| ESD Protection | ±15 kV IEC ESD protection | — |
| RS-232 Standard | TIA/EIA-232-F | — |
| Charge Pump | Dual charge-pump circuit | — |
| External Charge-Pump Capacitors | 4 capacitors | — |
| Package | 16-pin SSOP, 5.30 mm width | 16-SSOP (DB, 0.209 in / 5.30 mm width) |
| Mounting Type | Surface mount | Surface Mount |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | — |
| Supply Current | [DATA_NEEDED: supply current] | — |
| Driver Output Voltage | [DATA_NEEDED: driver output voltage] | — |
| Receiver Input Resistance | [DATA_NEEDED: receiver input resistance] | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Protocol | — | RS-232 |
| Type | — | Transceiver |
| Number of Drivers | — | 2 |
| Number of Receivers | — | 2 |
| Data Rate | — | 250 kbps (minimum) |
| ESD Protection (RS-232 Bus Pins) | — | ±15 kV (HBM) |
| ESD Protection (IEC 61000-4-2) | — | ±15 kV contact discharge / ±15 kV air-gap discharge |
| Standard Compliance | — | TIA/EIA-232-F |
| Operating Temperature | — | 0C to +70C |
| Packaging | — | Tube |
| External Capacitors Required | — | 4 x 0.1 uF (charge pump) |
| Lead Free Status | — | [DATA_NEEDED: lead free status] |