MAX3232EIPW vs MAX3232CPWR Comparison

Detailed side-by-side comparison of MAX3232EIPW by Texas Instruments and MAX3232CPWR by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

Texas Instruments
MAX3232EIPW MAX3232EIPW - 250kbps RS-232 Transceiver | Texas Instruments

MAX3232EIPW - 250kbps RS-232 Transceiver | Texas Instruments

MAX3232EIPW ✓ Active
Texas Instruments
MAX3232CPWR MAX3232CPWR - 250kbps Dual RS-232 Transceiver | TI

MAX3232CPWR - 250kbps Dual RS-232 Transceiver | TI

MAX3232CPWR ✓ Active

Specification Comparison

Parameter MAX3232EIPW MAX3232CPWR
Brand Texas Instruments Texas Instruments
Category Interface ICs Interface ICs
Lifecycle Status Active Active
Device Type Dual RS-232 line driver/receiver with dual charge pump —
Number of Transmit Channels 2 channels —
Number of Receive Channels 2 channels —
Supply Voltage Range 3 V to 5.5 V 3 V to 5.5 V
Maximum Data Rate 250 kbps 250 kbit/s
ESD Protection ±15 kV IEC ESD, pin-to-pin ±15 kV
RS-232 Compliance TIA/EIA-232-F —
Interface Direction Full duplex —
Package 16-pin TSSOP 16-pin TSSOP (PW)
Mounting Type Surface mount Surface mount
Operating Temperature Range [DATA_NEEDED: operating temperature range] —
Supply Current [DATA_NEEDED: supply current] —
Input Logic Voltage [DATA_NEEDED: input logic voltage threshold] —
Output Logic Voltage [DATA_NEEDED: output logic voltage level] —
Driver Output Swing [DATA_NEEDED: RS-232 output swing] —
Receiver Input Resistance [DATA_NEEDED: receiver input resistance] —
Charge-Pump Capacitors [DATA_NEEDED: recommended charge-pump capacitance] —
RoHS Status unknown —
REACH Status unknown —
AEC-Q100 Qualification not_applicable —
Product Type — Dual RS-232 line driver/receiver transceiver
Number of Drivers — 2
Number of Receivers — 2
Typical Supply Current — 300 µA
External Charge-Pump Capacitors — 0.1 µF
Logic Compatibility — Accepts 5-V logic
Standards Compliance — Meets or exceeds TIA/EIA-232-F and ITU V.28 requirements
Interface Type — RS-232
Channel Configuration — 2/2 full RS-232 transceiver
Operating Supply — Single 3 V to 5.5 V supply
Protection Scope — RS-232 line-driver and receiver terminals, including ground
Manufacturer — Texas Instruments

Datasheets & Resources

Browse All Products Create BOM Request Quote