MAX3232EIPW vs MAX3232CPWR Comparaison

Comparaison détaillée côte à côte de MAX3232EIPW par Texas Instruments et MAX3232CPWR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Texas Instruments
MAX3232EIPW MAX3232EIPW - 250kbps RS-232 Transceiver | Texas Instruments

MAX3232EIPW - 250kbps RS-232 Transceiver | Texas Instruments

MAX3232EIPW ✓ Actif
Texas Instruments
MAX3232CPWR MAX3232CPWR - 250kbps Dual RS-232 Transceiver | TI

MAX3232CPWR - 250kbps Dual RS-232 Transceiver | TI

MAX3232CPWR ✓ Actif

Comparaison des spécifications

Paramètre MAX3232EIPW MAX3232CPWR
Marque Texas Instruments Texas Instruments
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Device Type Dual RS-232 line driver/receiver with dual charge pump —
Number of Transmit Channels 2 channels —
Number of Receive Channels 2 channels —
Supply Voltage Range 3 V to 5.5 V 3 V to 5.5 V
Maximum Data Rate 250 kbps 250 kbit/s
ESD Protection ±15 kV IEC ESD, pin-to-pin ±15 kV
RS-232 Compliance TIA/EIA-232-F —
Interface Direction Full duplex —
Boîtier 16-pin TSSOP 16-pin TSSOP (PW)
Type de montage Surface mount Surface mount
Plage de température de fonctionnement [DATA_NEEDED: operating temperature range] —
Courant d'alimentation [DATA_NEEDED: supply current] —
Input Logic Voltage [DATA_NEEDED: input logic voltage threshold] —
Output Logic Voltage [DATA_NEEDED: output logic voltage level] —
Driver Output Swing [DATA_NEEDED: RS-232 output swing] —
Receiver Input Resistance [DATA_NEEDED: receiver input resistance] —
Charge-Pump Capacitors [DATA_NEEDED: recommended charge-pump capacitance] —
Statut RoHS unknown —
REACH Status unknown —
AEC-Q100 Qualification not_applicable —
Product Type — Dual RS-232 line driver/receiver transceiver
Number of Drivers — 2
Number of Receivers — 2
Typical Supply Current — 300 µA
External Charge-Pump Capacitors — 0.1 µF
Logic Compatibility — Accepts 5-V logic
Standards Compliance — Meets or exceeds TIA/EIA-232-F and ITU V.28 requirements
Type d'interface — RS-232
Channel Configuration — 2/2 full RS-232 transceiver
Operating Supply — Single 3 V to 5.5 V supply
Protection Scope — RS-232 line-driver and receiver terminals, including ground
Manufacturer — Texas Instruments

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis