MAX3232EIPW vs MAX3232EIPWRQ1 Comparison

Detailed side-by-side comparison of MAX3232EIPW by Texas Instruments and MAX3232EIPWRQ1 by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

Texas Instruments
MAX3232EIPW MAX3232EIPW - 250kbps RS-232 Transceiver | Texas Instruments

MAX3232EIPW - 250kbps RS-232 Transceiver | Texas Instruments

MAX3232EIPW ✓ Active
Texas Instruments
MAX3232EIPWRQ1 MAX3232EIPWRQ1 - 250kbps RS-232 Transceiver | Texas Instruments

MAX3232EIPWRQ1 - 250kbps RS-232 Transceiver | Texas Instruments

MAX3232EIPWRQ1 ✓ Active

Specification Comparison

Parameter MAX3232EIPW MAX3232EIPWRQ1
Brand Texas Instruments Texas Instruments
Category Interface ICs Interface ICs
Lifecycle Status Active Active
Device Type Dual RS-232 line driver/receiver with dual charge pump —
Number of Transmit Channels 2 channels —
Number of Receive Channels 2 channels —
Supply Voltage Range 3 V to 5.5 V 3 V to 5.5 V
Maximum Data Rate 250 kbps 250 kbit/s
ESD Protection ±15 kV IEC ESD, pin-to-pin ±15 kV IEC, pin-to-pin
RS-232 Compliance TIA/EIA-232-F —
Interface Direction Full duplex —
Package 16-pin TSSOP 16-pin TSSOP
Mounting Type Surface mount Surface mount
Operating Temperature Range [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Supply Current [DATA_NEEDED: supply current] —
Input Logic Voltage [DATA_NEEDED: input logic voltage threshold] —
Output Logic Voltage [DATA_NEEDED: output logic voltage level] —
Driver Output Swing [DATA_NEEDED: RS-232 output swing] —
Receiver Input Resistance [DATA_NEEDED: receiver input resistance] —
Charge-Pump Capacitors [DATA_NEEDED: recommended charge-pump capacitance] —
RoHS Status unknown [DATA_NEEDED: RoHS compliance status]
REACH Status unknown —
AEC-Q100 Qualification not_applicable —
Number of Drivers — 2
Number of Receivers — 2
Transceiver Configuration — 2/2 full-duplex
Interface Standard — ITU V.28
Charge-Pump Supply Outputs — V+ and V−
Standby Current — 300 µA typical
Automotive Qualification — AEC-Q100 qualified
Package Width — 4.40 mm
Package Length — 0.173 in
Packaging — Tape and reel

Datasheets & Resources

Browse All Products Create BOM Request Quote